§ 49-1545 — Location of reduced pressure principle backflow devices and double-check assemblies
Omaha Municipal Code (Supp. No. 100, Update 2: codified through Ordinance No. 44760, enacted August 4, 2026) · Omaha Municipal Code § 49-1545
Corpus is an independent public-information project, not the official City of Omaha website. Stable reference: corpuslaw.us/code/75ad48bd-b745-43ef-b1ec-07b2b06b532d
Sec. 49-1545. - Location of reduced pressure principle backflow devices and double-check assemblies.
Installations of backflow assemblies shall observe the following provisions: (a) Install according to manufacturer's instructions and modifying instructions (if necessary) to provide at least one foot clear space in front of the test ports. (b) Clear space for servicing and testing: (1) Assembly sizes one-fourth inch through 1½-inches require 30 inches by 30 inches by six feet high. (2) Assembly sizes two inches through three inches require 36 inches by 36 inches by six feet high. (3) Assembly sizes larger than three inches require the length of the backflow assembly plus one foot by four feet by six feet six inches high. (c) Mounting height shall be at least one foot above the ground, floor or platform to the bottom of the assembly and five feet maximum from the ground, floor or platform to the outlet of the highest tests ports of the backflow preventer. (d) When connected to a Metropolitan Utilities District main, it shall not be installed in a pit unless approved by the Metropolitan Utilities District. (e) When connected to a potable well, it shall not be installed in a pit unless approved by the plumbing board. (f) When a bypass is installed around the assembly, the bypass shall incorporate an additional backflow preventer assembly of the same type as the primary backflow assembly.
(Ord. No. 40524, § 1, 10-20-15)
Ask a question about Omaha law
Corpus searches the Omaha sections it holds and shows the ones that match, with their citations. Free, no sign-in.
