Off-Street Parking Layout and Design
Reno Annexation and Land Development Code § 18.04.707
in effect18.04.707 - Off-Street Parking Layout and Design
(a) Use of Parking and Loading Areas
(1) Except for single-family and duplex dwellings, no required off-street parking or loading space shall be used for any purpose other than the parking of vehicles, unless otherwise allowed by this Title. Off-street parking spaces provided in excess of the number required may be used for any legal purpose within the respective zoning district. If a required off-street parking space is converted to another use or can no longer be used for off-street parking, it shall be deemed a violation of this Title.
(2) Parking shall be prohibited in aisle ways, fire lanes, or similar areas not officially designated for parking purposes. These areas shall be posted with "No Parking" signs and/or other means as required by the Administrator.
(3) Required parking spaces and areas shall not be used for the sale, display, or repair of motor vehicles or other goods and services unless authorized by a temporary use permit issued in accordance with Chapter 18.08 Administration and Procedures.
(4) Vehicles, recreational vehicles, campers, trailers, buses, vans, motor homes, moving vans, refrigerator trucks or similar vehicles shall not be used for storage, overnight occupancy, or any similar use, except as authorized by the Administrator.
(b) Location Standards Parking lots areas shall be designed to comply with all applicable parking area location and design standards in Sections 18.04.903(a)(3) (Residential Districts), 18.04.1003(a) (Urban Districts), and 18.04.1103(a) (Employment Districts).
(c) Dimensional Standards
(1) Parking Spaces and Aisle Widths Parking spaces and aisle widths within parking areas shall be configured according to Table 4-10 and Figure 4-5, below:
Figure 4-5: Off-Street Parking Dimensions
[image omitted; see the official code]
Table 4-10 Off-Street Parking Dimensional Standards
Stall Angle | Stall Width | Vehicle Projection (19' Stall) | Aisle Width | Curb Length Per Car | Double Aisle Width | Overlap Center Width for Double Aisle
0° | 8'0" | 8.0 | 12.0 | 23.0 | 28.0 | —
8'6" | 8.5 | 12.0 | 23.0 | 29.0 | —
9'0" | 9.0 | 12.0 | 23.0 | 30.0 | —
9'6" | 9.5 | 12.0 | 23.0 | 32.0 | —
10'0" | 10.0 | 12.0 | 23.0 | 32.0 | —
20° | 9'0" | 15.0 | 11.0 | 26.3 | 32.5 | 41.0
9'6" | 15.5 | 11.0 | 27.8 | 33.1 | 42.0
10'0" | 15.9 | 11.0 | 29.2 | 33.4 | 42.8
30° | 9'0" | 17.3 | 11.0 | 18.0 | 37.8 | 45.6
9'6" | 17.8 | 11.0 | 19.0 | 38.4 | 46.6
10'0" | 18.2 | 11.0 | 20.0 | 38.7 | 47.4
45° | 9'0" | 19.8 | 13.0 | 12.7 | 46.5 | 52.5
9'6" | 20.1 | 13.0 | 13.4 | 46.5 | 53.3
10'0" | 20.5 | 13.0 | 14.1 | 46.9 | 54.0
60° | 9'0" | 21.0 | 18.0 | 10.4 | 55.5 | 60.0
9'6" | 21.2 | 18.0 | 11.0 | 55.6 | 60.4
10'0" | 21.5 | 18.0 | 11.5 | 56.0 | 61.0
70° | 9'0" | 21.0 | 19.0 | 9.6 | 57.9 | 61.0
9'6" | 21.2 | 18.5 | 10.1 | 57.7 | 60.9
10'0" | 21.2 | 18.0 | 10.6 | 57.0 | 60.4
80° | 9'0" | 20.3 | 24.0 | 9.1 | 62.7 | 64.3
9'6" | 20.4 | 24.0 | 9.6 | 62.7 | 64.4
10'0" | 20.5 | 24.0 | 10.2 | 63.3 | 65.0
90° | 9'0" | 19.0 | 24.0 | 9.0 | 62.0 | —
9'6" | 19.0 | 24.0 | 9.5 | 62.0 | —
10'0" | 19.0 | 24.0 | 10.0 | 62.0 | —
(2) Compact Spaces for Off-Street Parking
a. Up to 25 percent of the required number of parking spaces in a parking lot may be sized for compact cars. The compact spaces shall measure a minimum of 8 feet wide by 16 feet long. Each compact space shall be clearly marked "compact only".
b. Projects on lots no greater than 10,000 square feet in size may reduce the size of all parking stalls to be as small as 16 feet by 9 feet or 19 feet by 8 feet to accommodate site limitations.
(3) Wheel Stops Wheel stops or other measures that meet the objectives of wheel stops approved by the Administrator shall be provided adjacent to landscaped areas, except a two-foot vehicle overhang may be permitted where parking abuts a sidewalk or landscaping with a minimum width of six feet.
(4) Parking and Maneuvering Areas To discourage parking in areas with insufficient space, driveways and other parking areas may not be smaller than the minimum size required for an off-street parking space.
(d) General Standards
(1) Parking Area Circulation
a. Adequate ingress, egress, on-premises circulation, and maneuvering areas shall be provided. Interior circulation in parking areas shall be designed to avoid any vehicular stacking on arterial or collector streets as the result of vehicular movements within parking areas.
b. In cases where an off-street parking lot serving a nonresidential use is located on an abutting lot, connection between the two parking areas via a cross-accessway with a minimum width of 12 feet and a maximum width of 24 feet is strongly encouraged.
(2) Large Parking Areas Any development that includes 600 or more parking spaces shall either:
a. Place a minimum of 70 percent of the spaces over 600 within a parking garage; or
b. Provide enhanced landscaping as required in Section 18.04.804(e).
(3) Excess Parking If more than 150 percent of the required parking for projects requiring 20 or more parking spaces is provided as surface parking, additional landscaping is required in the amount of an additional ten square feet of landscape area for each parking space in excess of 150%. per Section 18.04.804(e). In lieu of providing the required excess landscaping, a contribution may be made to the City parkway and boulevards landscaping fund. The contribution shall be based on the cost of the additional landscaping which is required.
(4) Minimizing Vehicular and Pedestrian Conflicts
a. Traffic control signs and/or striping shall be provided within all parking areas as necessary to prioritize pedestrian safety and minimize vehicular and pedestrian conflicts.
b. Groundcover adjacent to walkways within or adjacent to parking lots shall be designed to provide level walking surfaces from the walkway to all adjacent parking areas. The use of large rocks and other barriers to pedestrian connectivity shall be avoided.
c. If vehicular and pedestrian conflicts are apparent, the Administrator may require an alternative design of parking areas to resolve potential conflicts.
(5) Parking Area Landscaping All parking lot landscaping shall be provided in accordance with Section 18.04.804 Minimum Landscaping Required.
(6) Parking Area Lighting All parking lot lighting shall be provided in accordance with Section 18.04.1305, Parking Area Lighting.
(e) Modifications The Administrator may modify the requirements of this section, if in the opinion of the Administrator, a potential traffic safety concern is not present.
(1) The Administrator may approve alternative parking space sizes and parking area design in order to retain existing trees, native vegetation, or unique, natural features within the parking area.
(2) The Administrator may approve alternative parking space sizes in parking garages so long as the parking garage will still meet the expected needs of the use.
(3) The Administrator may approve alternative parking space sizes when it is determined that the reduction is a preferred design component in the implementation of LID objectives.
(4) The Administrator may allow dedicated employee parking in offices or office complexes with a minimum of 100 stalls to utilize the dimensions given for a nine-foot wide stall, except that the stall width may be reduced to 8 ½ feet.
(f) Parking Area Construction Materials Parking areas may be constructed of Portland or asphaltic concrete or alternate materials that meet industry standards and can accommodate expected vehicle loads:
(1) Asphaltic Concrete All off-street parking areas shall be surfaced with a minimum of two inches of asphaltic concrete compacted 95 percent maximum density as determined by ASTM D 1074. Asphaltic concrete shall be placed over six inches of crushed aggregate base compacted to 95 percent maximum density as determined by Nev. T-101.
(2) Portland Concrete Portland concrete shall meet minimum industry standards.
(3) Alternate Materials Alternate materials such as pavers and blocks may be used if an engineering study determines that they will support the expected loading and traffic and be sufficiently durable. The use of these materials is subject to the approval of the Administrator.
a. Curbs Portland cement concrete curbing shall be provided to prevent free roll onto public rights-of-way unless alternative design and/or materials, subject to the approval of the Administrator, are used towards the implementation of LID objectives.
b. Storage Yards Storage yards may be constructed of Portland or asphaltic concrete or rotomill grindings or alternative materials, subject to the approval of the Administrator.
(g) Construction of Parking Areas
(1) Existing Non-Paved Parking In order to reduce air and water pollution, soil erosion, and street sweeping costs, all existing unpaved areas which are used for off-street parking or storage of vehicles shall be paved in accordance with this section within nine months of notice given by the administrator. Temporary construction equipment parking in association with a construction project is exempt. No new unpaved areas may be established as parking areas following the effective date of this article.
(Ord. No. 6692, § 1(Exh. A), 1-8-25)
Source: City of Reno, Nevada, Administrative Code, City Charter and Annexation and Land Development Code (Municode Library, library.municode.com)URL: https://library.municode.com/nv/reno/codes/land_development_code?nodeId=CH18.04DEST_ART7OREPALO_18.04.707OREPALADEFetched: 11/1/2026
