§ 35.4.311 — Building Signs
Code of the City of Glendale, Arizona (Supp. No. 115: codified through Ordinance No. O26-19, adopted April 14, 2026) · Glendale City Code § 35.4.311
Corpus is an independent public-information project, not the official City of Glendale website. Stable reference: corpuslaw.us/code/8bea393f-b379-49d3-8cfe-e02ee5a4f694
35.4.311 - Building Signs.
This Section is comprised of permitted Building Signs and their respective regulations. Signs not appearing in this Section shall be considered prohibited. Table 4.300-5: Total Building Sign Area Maximum Total Sign Area Allowed | The maximum total sign area allowed per business having an external business entrance is limited by the size and frontage of the building on which the sign(s) will be placed. The table below shall be consulted to determine the permitted total business signage area by use category or special condition.* Business frontage is determined by the measurement of the portion of the business facing the street or public access driveway or public alley. Multi-story building lineal footage is limited to the ground floor lineal footage measurement except as modified by the subsections below. The individual area of each building sign placed on a building shall be counted towards the total permitted Building Sign area allowance, unless otherwise noted herein. [image omitted; see the official code] Use | Total Square Feet of Building Signage Allowed Single Residence | N/A Multiple Residence | 1.25 square feet per 1 linear foot of leasing office space frontage or 50 square feet, whichever is greater, but in no case more than 60 square feet per multiple residence development. Professional Office | 1.5 square feet per 1 linear foot of business frontage or 50 square feet, whichever is greater. Maximum square feet based on business square footage: 60 sf maximum signage for businesses <5,000 sf; 150 sf maximum signage for businesses 5,000 sf to 20,000 sf; 250 sf maximum signage for businesses 20,000 sf to 40,000 sf; 450 sf maximum signage for businesses >40,000 sf General Commercial and Public/Semi-Public | 2 square feet per 1 linear foot of business frontage or 50 square feet, whichever is greater.** Maximum square feet based on business square footage: 150 sf maximum signage for businesses <20,000 sf; 250 sf maximum signage for businesses 20,000 sf to 40,000 sf; 450 sf maximum signage for businesses >40,000 sf Business/Industrial | 1.75 square feet per 1 linear foot of business frontage or 50 square feet, whichever is greater.** Maximum square feet based on business square footage: 200 sf maximum signage for businesses <40,000 sf; 350 sf maximum signage for businesses 40,000 sf to 80,000 sf; 500 sf maximum signage for businesses >80,000 sf *Non-residential uses having only an internal business entrance and no external wall facing a public street or public access driveway or public alley shall be limited to business identification signage on a multi-tenant building wall mounted sign as set forth in subsection 35.4.311(G)(9) **Multi-tenant building, wall mounted signs shall adhere to subsection 35.4.311(G)(9) A. Awning 1. Permit required. 2. Maximum of twenty-five percent (25%) of each surface area of an awning may be used for signage. A valance is considered a separate surface area. 3. Awning signs shall be mounted within the first story of the structure. 4. Awning signs shall maintain a minimum vertical clearance of nine (9) feet. 5. Awning signs may encroach over a public or private sidewalk, but shall be no closer than four (4) feet from the back of curb. If encroaching over an abutting City right-of-way line, a revocable City encroachment permit or other City granted authorization shall be required. 6. A structural awning is permitted a sign face area attached to and located above the top of the canopy to a maximum height of twenty-four (24) inches. 7. Structural awnings shall be made of metal or material of similar durability and structural integrity. 8. Awning and canopy signs may be illuminated but lighting shall be installed as external downlighting or backlighting. Only the face area of the letters or graphics may be illuminated. Awning Sign [image omitted; see the official code] B. Electronic Reader Panel 1. Permit required. 2. Reader panel signs shall be no closer than one hundred fifty (150) lineal feet from a single-family residential use. 3. Commercial, civic, and institutional uses may have one (1) reader panel sign per building not to exceed thirty-two (32) square feet in area. 4. No reader panel sign affixed to a building, including sign support structure, shall project beyond the ends or top of the wall or higher than the roofline of the structure to which it is attached. 5. The following uses in any district are permitted an electronic sign: cultural facility, educational facility—primary or secondary, educational facility—university or college, government office/facility, park/playground, place of worship. 6. Each message or image displayed on an electronic sign shall be static for a minimum of eight (8) seconds. Electronic signs shall display static text messages only, with no animation or effects simulating animation or video. 7. Scrolling, flashing, animation, or movement of the message or any component of the sign is prohibited. Any message change sequence shall be accomplished immediately by changing from one screen to another without transition effect. C. Marquee 1. Permit required. 2. Each marquee sign face shall be limited to thirty-two (32) square feet in area. 3. Marquee signs shall be supported solely by the building to which they are attached. No exterior columns or posts are permitted as supports. 4. Marquee signs shall be erected over a building entrance. The width of a marquee sign is limited to the width of the building entrance with an additional two-foot extension of the marquee sign allowed on each side of the building entrance. 5. All marquee signs shall maintain a minimum vertical clearance of nine (9) feet. 6. Marquee signs may encroach over a public or private sidewalk, but shall be no closer than four (4) feet from the back of curb. If encroaching over an abutting City right-of-way line, a revocable City encroachment permit or other City granted authorization shall be required. 7. Marquees may be internally or externally illuminated. D. Mural 1. Permit required. 2. No person shall place artwork, mural, graffiti, write, paint or draw any inscription, figure, or mark of any type on any property unless the express permission of the owner or operator of the property has been obtained and a design review waiver and formal approval by the City has been issued. 3. It shall be the responsibility of the owner or operator of property upon which a mural is placed to maintain the appearance of the mural. A mural that is permitted to remain in a condition of disrepair shall constitute a public nuisance. 4. Murals or similar graphic elements which advertise, either directly or implied, the business or services or products sold at the location of the mural shall be deemed signage and shall be regulated accordingly. 5. All murals or other similar forms of visual art shall be placed or painted on the side or rear walls of the building, and not on its primary facade, above its roof line, or on any of its decorative elements. 6. Murals or other strong graphic elements shall be prohibited on privacy or screen walls when visible from the public right-of-way or adjacent property. 7. The installation of a mural should complement and enhance the building or wall and be incorporated architecturally into the character of the area. 8. The location of a mural on a building should not cover or detract from significant or character-defining architectural features. 9. Paint utilized should be intended for exterior use and which will not compromise the integrity of the material to which it is applied. Reflective neon and fluorescent paint should not be used. E. Place Marker 1. Permit required. 2. Shall not exceed an aggregate area of three (3) square feet and shall be affixed directly to the building generally within ten (10) feet from any entrance. 3. Residence signs: one (1) or more wall signs not to exceed a total aggregate area of three (3) square feet shall be permitted. The sign may include only the name of the residence, the name of the occupant, and the street address. 4. Agriculture signs: One (1) or more wall signs not to exceed a total aggregate area of eight (8) square feet shall be permitted. The sign may include only the name of the farm or ranch and a street address. F. Skyline 1. Permit required. 2. Skyline signs are permitted only for non-residential structures and multi-family dwellings of 40 feet or more in height in PR and C-3 zoning districts. 3. The maximum area of a skyline sign shall be determined by Table 4.300-5. 4. Skyline signs shall be placed within the top twelve (12) feet of the structure and cannot cover any fenestration or architectural features. 5. Skyline signs may project up to three (3) feet above the roofline or parapet of buildings less than forty (40) feet in height and five (5) feet above the roofline or parapet of buildings forty (40) feet in height or taller. Skyline signs shall be designed to mount to a wall and shall not be primarily supported by structures installed on the roof. 6. If a skyline sign is placed on a building, all other wall signs are prohibited. 7. One skyline sign is permitted per building. 8. Skyline signs shall only be internally illuminated. Skyline Sign [image omitted; see the official code] G. Wall, Mounted 1. Permit required. 2. Wall signs are permitted on each facade of a structure. On a site consisting of multiple structures, each structure is permitted wall signs per the size and location regulations of this Section. 3. Wall signs may be internally or externally illuminated. If externally illuminated, all light shall be directed onto the sign face and shall be shielded from the public right-of-way and adjacent residential uses. 4. Wall signs shall be safely and securely attached to the building wall. 5. Wall signs shall not project more than fourteen (14) inches from a building wall. 6. No wall sign affixed to a building, including sign support structure, shall project beyond the ends or top of the wall or higher than the roofline of the structure to which it is attached. 7. Parapets added to existing buildings for the purpose of attaching signs shall match the architecture of the rest of the building, be of the same thickness, and on the same plane as the wall to which it is added, and no more four (4) feet above the roofline. Additions to a parapet for the purpose of signage cannot be braced back to the roof. 8. Wall signs cannot cover any window, windowsill, transom sill, or architectural feature, such as cornices, of the structure. 9. Multi-tenant building wall mounted identification signs are permitted in the Professional Office, Commercial and Business/Industrial Zoning Districts, subject to the conditions identified below: a. The use of a multi-tenant building wall mounted identification sign shall take the place of single business wall mounted signs and shall be counted as a portion of the total allowed building sign area. b. The maximum number of multi-tenant signs for each building shall be limited to one (1) sign per street frontage. c. The maximum area of the multi-tenant sign shall not exceed the greater of sixty (60) square feet or one and one-half (1.5) square feet per lineal foot of combined building frontage for each business, but in no case more than three hundred (300) square feet per multi-tenant sign. 10. In the R-O, C-O, and G-O zoning districts: a. These signs shall not exceed a height of fifteen (15) feet. b. The maximum sign area permitted per building shall be twenty-four (24) square feet in the R-O and C-O districts and forty-eight (48) square feet in the G-O district. Except, the maximum sign area permitted per building shall be one hundred (100) square feet in the C-O and G-O districts for any office building which exceeds ten thousand (10,000) square feet or more and is located on a site with three hundred thirty (330) lineal feet or more of continuous frontage on an arterial street, and the sign face cannot be seen from residential districts. The maximum sign area per tenant shall not exceed forty (40) square feet on any building elevation. c. Such sign may identify the individual businesses, building complex, or center, by name, or street address. Such sign shall not include advertising copy. Mounted Wall Sign [image omitted; see the official code] H. Wall, Painted 1. Permit required. 2. Signs are permitted for all non-residential uses in any district. 3. Signs are permitted on each facade of a structure. 4. Painted wall signs shall be painted directly on the building's façade. 5. Signs shall not be painted on or obscure architectural features such as windows, doors, pilasters, or cornices. 6. Painted signs shall be applied utilizing exterior weather resistant paint. 7. Signs may be externally illuminated provided all light sources are directed onto the sign face and shall face in a downward direction. 8. Signs shall not project more than 0.25 inches from a building wall. 9. Nothing in this section shall prevent an installer from incorporating their name or other identifying information as part of the painted wall sign. 10. The property owner, or their authorized representative such as the business owner, is responsible for ensuring that a permitted painted wall sign is maintained in good condition and is repaired in the case of vandalism or accidental damage. Painted Wall Sign [image omitted; see the official code] I. Wall, Projected 1. Permit required. 2. Signs are permitted for all non-residential uses in any district. 3. Signs must remain static and cannot flash, rotate, or move. 4. No projected wall sign can project an electronic video. 5. Signs shall not glare onto adjacent properties. 6. Signs shall not project past the wall onto which it is projected. 7. Signs shall not be projected over any other sign type. J. Wall, Projecting 1. Permit required. 2. Projecting signs shall maintain a minimum vertical clearance of nine (9) feet. No projecting sign affixed to a building shall project higher than the building height, including the sign support structure. 3. Projecting signs are limited to a maximum sign area of five (5) square feet. 4. Projecting signs may be internally or externally illuminated. 5. Allowed only on the exterior elevation of the space occupied by the business. 6. No more than one (1) projecting sign per business per street or alley frontage. For a corner lot, one projecting sign is permitted for each street frontage. 7. Minimum separation between the sign and the face of the building: Three (3) inches. 8. Maximum sign projection from the face of the building: Five (5) feet. 9. Minimum horizontal distance from projecting edge of sign and back of curb, existing or future: Four (4) feet. 10. For one-story buildings: a. The top of the sign and supporting framework shall not be higher than the top of the cornice line. 11. For multiple story buildings: a. The top of the sign and supporting framework shall not be higher than the top of the second-story windowsills. 12. The sign shall be perpendicular to the building and attached to the bracket on which it is hung so that it will not swing. Projecting Wall Sign [image omitted; see the official code] K. Window 1. No permit required. 2. The area covered by window signs shall not exceed thirty percent (30%) of the exterior window area. Window area is counted as a continuous surface until divided by an architectural or structural element. Mullions shall not be considered such an element. 3. Window signs on required doors shall not exceed thirty percent (30%) of the glass area of the door. 4. Window signs printed on perforated, semi-opaque material shall be counted in the same manner as non-perforated, fully-opaque materials, including paint. 5. Window signs are permitted for all multi-family and non-residential uses and shall be permitted on the ground floor only. Such signs shall not be permitted on individual multi-family tenant windows. 6. Window signs affixed directly to a window shall not be illuminated. 7. Signs placed within a building a manner that the intent of the placement is to be viewable from the public right-of-way shall be considered a window sign and shall be subject to the regulations of this Section. Window Sign [image omitted; see the official code]
Ask a question about Glendale law
Corpus searches the Glendale sections it holds and shows the ones that match, with their citations. Free, no sign-in.
