Inspection of installed equipment.
Oklahoma City Municipal Code § 20-152
in effect§ 20-152. - Inspection of installed equipment.
(a) Installations to conform to Code regulations. All alarm system equipment installed by any person according to the provisions of this article shall conform with and meet the regulations prescribed by this Code.
(b) Prior to installation or alteration of equipment or wiring, complete information regarding the system or system alterations, including specifications, wiring diagrams, and floor plans shall be submitted to the Fire Marshal's Office for approval. The information submitted shall be in conformance with applicable NFPA Codes, the Oklahoma City Building Code and applicable standards in the Oklahoma City Fire Prevention Code. All equipment installed or altered must have the prior approval of a Fire Marshal official before installation or alteration. All installations or alterations shall be inspected by a Fire Marshal official. A fee shall be paid by the licensed alarm contractor installing the equipment as established in Chapter 60, the General Schedule of Fees. Upon approval by a Fire Official and payment of the applicable fee, a permit shall be issued.
(c) All automatic detection, extinguishing, and fire protective systems shall be inspected and tagged at least annually, or as often as required by applicable NFPA Standards. Tagging requirements shall conform to the requirements of the State of Oklahoma.
(Ord. No. 21843, § 2, 11-6-01, eff. 3-6-02; Ord. No. 24828, § 9, 2-25-14, eff. 5-1-14)
Source: City of Oklahoma City, Municipal Code and City Charter (Municode Library, library.municode.com)URL: https://library.municode.com/ok/oklahoma_city/codes/code_of_ordinances?nodeId=OKMUCO2020_CH20FIPRPR_ARTIIIFIDEALSY_DIV1GE_S20-152ININEQFetched: 10/28/2026