For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 28-446 — Irrigation plan design: minimum standards

Code of Ordinances, City of Denton, Texas (Supp. No. 37, Update 1: codified through Ordinance No. 26-296 adopted March 24, 2026) · Denton City Code § 28-446

Corpus is an independent public-information project, not the official City of Denton website. Stable reference: corpuslaw.us/code/9059bc58-2186-48d2-b7e7-d13893935a95

Sec. 28-446. - Irrigation plan design: minimum standards.

(a) All irrigation plans must be prepared by an irrigator licensed under 30 Texas Admin. Code § 30.120(b). An irrigator shall prepare or arrange for the preparation of an irrigation plan for each site where a new irrigation system will be installed. The irrigator shall present the plan with a permit application to the city building safety department for review. During the installation of the irrigation system, variances from the original irrigation plan may be authorized by the irrigator if the variances do not: (1) Diminish the operational integrity of the irrigation system; (2) Violate any requirements of this article XI; or (3) Go unnoted in red on the irrigation plan. (b) The irrigation plan must include complete coverage of the area to be irrigated. If an irrigation system does not provide complete coverage of the area to be irrigated, it must be noted in the irrigation plan. (c) All irrigation plans submitted for review by the city building safety department must be legible and include the following information: (1) The seal and signature of the irrigator licensed under 30 Texas Admin. Code § 30.120(b) and the date sealed; (2) Physical features (For example, and without limitation, property lines, trees, streets, sidewalks, driveways, fences, flower bed lines, buildings, and boundaries of the areas to be watered); (3) A north arrow; (4) The scale used and a legend showing the symbols used in the irrigation plan and an accurate description of what each symbol represents; (5) The zone flow measurement for each zone which includes the zone/controller station number and the zone valve size; (6) The location and type of every controller and sensor (For example, and without limitation, rain, moisture, wind, flow, and freeze); (7) The design pressure; and (8) The location, type, and size of each: a. Water source (for example, and without limitation, each municipal water meter or reclaimed water source); b. Backflow prevention assembly; c. Emission device, including, but not limited to, spray heads, rotary sprinkler heads, quick-couplers, bubblers, drip, and micro-sprays; d. Valve, including, but not limited to, zone valves, master valves, and isolation valves; e. Pressure regulation component (for example, and without limitation, pressure regulation valves and pressure regulating emitters); and f. Main line and lateral piping.

(Ord. No. 26-270, § 2(Exh. A), 3-24-26)

Ask a question about Denton law

Corpus searches the Denton sections it holds and shows the ones that match, with their citations. Free, no sign-in.