Measurement standards.
Round Rock Zoning and Development Code, art. IX, § 8-73
in effectSec. 8-73. - Measurement standards.
(a) The following standards shall regulate the computation of sign size and height:
(1) Building signs.
a. Determining sign display area of building signs.
1. For a building sign which is framed, outlined, painted or otherwise prepared and intended to provide a background for a sign display, the sign display area's dimensions shall include the entire portion within such background or frame.
2. For a building sign comprised of individual letters or other items of information on a wall or surface of the building or accessory structure or mounted on a raceway that blends in with the background onto which it is mounted, the sign display area's dimensions shall be the sum of the regular geometric shapes (rectangle, square, circle, triangle, etc.) encompassing individual items of information.
3. The allowable sign display area for each occupant shall be based on the occupant's frontage on a public right-of-way, private street, vehicle drive aisle, or public space internal to a multi-occupant center. Sign display area shall be calculated separately for each building frontage. For any occupant frontage with a wall that is on an angle to a roadway, the occupant frontage length shall be measured by taking 50 percent of the sum of the linear footage allowed for said roadways. The maximum square foot allowance of sign display area shall be calculated in the same manner.
4. The amount of display area for a wall sign may be affected by placement requirements found in Sec. 8-76.
5. Clearance for building signs over pedestrian walkways shall be measured as the smallest vertical distance between finished grade and the lowest point of the sign, including any framework or other embellishments.
6. Where there is a non-principal building or structure, such as vehicle service canopies and structured parking facilities, signs shall be considered to be accessory signs and such signs shall not be counted against the sign area allowed for the business.
7. When two identical sign display areas, such as on a projecting sign, are placed back to back so that both cannot be viewed from any point at the same time, and are part of the same sign, the sign display area shall be computed as the measurement of one side of the sign.
8. The sign display area for all awnings/canopies shall not exceed the allowable square footage for this type of sign.
9. Measurement of vehicle service canopy sign display area shall not include the background and striping on the face of a flat-roofed canopy.
10. Window sign display area shall not be included in the total sign display area for building signs.
b. Determining occupant frontage lengths for wall signs.
1. The facade length of the occupant frontage on the first floor shall be the basis for determining the permissible sign display area for building signs.
2. Determining occupant frontage lengths.
(i) The length of any occupant frontage shall be equal to the wall length of a building elevation.
(ii) No portion of any building elevation shall be counted towards more than one occupant frontage, even when visible from two roadways.
(iii) The occupant frontage for a space in a building with multiple occupants shall be measured from the centerline of the demising wall separating the building unit.
(2) Freestanding signs.
a. Determining area of freestanding signs.
1. For freestanding signs, the sign display area shall include any portion of the sign which contains items of information. When more than one sign makes up a freestanding sign, the individual signs shall be totaled to determine the sign display area. For a panel or cabinet contained in a freestanding sign, the sign display area calculation shall include the sign display area of the entire panel or cabinet. When individual letters are pinned to a freestanding sign, the sign display area's dimensions shall be the sum of the regular geometric shapes encompassing individual items of information or the area of each rectangle encompassing individual letters may be summed to determine the sign display area of a word.
2. When two identical sign display areas are placed back to back so that both cannot be viewed from any point at the same time, and are part of the same sign structure, the sign display area shall be computed as the measurement of one side of the sign.
3. For any freestanding sign that is on an angle at the intersection of two roadways that have different area standards, the total allowable sign display area shall be measured by summing 50 percent of the square footage allowed for each roadway.
4. For an area identification sign, the sign display area shall be measured as a building sign is measured.
b. Determining sign height for freestanding signs.
1. The height of a freestanding sign shall be measured from the base of the sign or supportive structure at the finished grade, to the highest point of the sign, including all attached components.
2. The finished grade of a sign's location from which the height is measured shall be exclusive of any filling, berming, mounding, or excavating solely for the purpose of locating the sign. In cases where the finished grade cannot reasonably be determined, sign height shall be measured on the assumption that the finished grade at the base of the sign is equal to the nearest pavement or top of any pavement curb.
3. Clearance for freestanding signs shall be measured at the smallest vertical distance between finished grade and the lowest point of the sign, including any framework or other embellishments.
4. Freestanding sign display areas and sign lighting system equipment shall be at least 14 feet above areas accessible to vehicles.
5. For any freestanding sign that is on an angle at the intersection of two roadways that have different height standards, the maximum allowable sign height shall be equal to the greater allowable height.
(Ord. No. O-2022-234, § II, 7-14-2022)
Source: City of Round Rock, Texas, Code of Ordinances (Municode Library, library.municode.com)URL: https://library.municode.com/tx/round_rock/codes/code_of_ordinances?nodeId=PTIIIZODECO_CH8ZODEST_ARTIXSI_S8-73MESTFetched: 11/16/2026
