§ 88-820-07 — FLOOR AREA RATIO
Code of Ordinances of Kansas City, Missouri (Supp. No. 140, Update 1: codified through Ordinance No. 260692, enacted August 13, 2026) · Kansas City Zoning and Development Code § 88-820-07
Corpus is an independent public-information project, not the official City of Kansas City website. Stable reference: corpuslaw.us/code/94347407-5fad-4327-871d-64261f3bbcbe
88-820-07 - FLOOR AREA RATIO
The floor area of the building divided by the total gross area of the lot upon which the building is located. 88-820-07-A. For the purpose of calculating floor area ratios, the "floor area" of a building is the sum of the gross horizontal area of all floors in the building measured from the interior faces of the exterior walls. The "floor area" of a building expressly includes all of the following: 1. floor area of any floor located below grade or partially below grade when more than one-half the floor-to-ceiling height of the below-grade (or partially-below-grade) floor is above grade level; 2. elevator shafts and stairwells on each floor; 3. floor area used for mechanical equipment, except equipment located on the roof and mechanical equipment within the building that occupies a commonly owned contiguous area of 5,000 square feet or more; 4. those portions of an attic having clear height (head-room) of 6 feet 9 inches or more; [image omitted; see the official code] 5. mezzanines; 6. enclosed porches; 7. floor area devoted to non-accessory parking; 8. floor area within a principal building that is occupied by accessory uses. 88-820-07-B. For the purpose of calculating floor area ratios, floor area devoted to accessory parking and the drive aisles and circulation area associated with such parking are not to be counted as "floor area."
(Ord. No. 120697, § 1, 8-23-2012)
Ask a question about Kansas City law
Corpus searches the Kansas City sections it holds and shows the ones that match, with their citations. Free, no sign-in.
