Development Standards.
Tupelo Development Code § 4.9.4
in effect4.9.4. - Development Standards.
MIXED-USE RESIDENTIAL DISTRICT (MUR)
Minimum/Maximum Lot Size * | 3,000 sq. ft. min. for traditional housing; 5,000- 14,520 sq. ft. for other single family housing. 5,000 sq. ft. minimum/no maximum for multi-family housing or non-residential.
Minimum/Maximum Width * | 30 - 90 feet for single family housing. 50 feet minimum/no maximum for multi-family housing or non-residential.
Minimum/Maximum Front Setback | 10 - 30 feet
Minimum/Maximum Side Setback ** | No minimum/50 feet maximum
Minimum/Maximum Rear Setback | 10 feet minimum/no maximum
Minimum/Maximum Height *** | 3 stories
Minimum/Maximum Density **** | Less than 30% for non-residential. Minimum 3/maximum 13 dwelling units per acre for residential.
Open Space Amenity | 5%
Maximum Floor Area Ratio (non-residential) | 0.5
* Existing parcels of land are exempt from minimum and maximum lot size and width requirements. A property owner will not be required to subdivide an existing parcel to conform to any minimum requirements.
** Residential units such as townhouses may be attached with a zero foot setback. A five foot minimum side setback shall be required on all other development.
*** Height limits do not apply to church spires, belfries, cupolas, or domes not used for human habitation, nor to chimneys, ventilators, skylights, parapet walls, cornices, solar energy systems, or necessary mechanical appurtenances usually located on the roof level, provided that such features are limited to the height necessary for their proper functioning and do not exceed the limitations of the airport hazard zoning regulations.
**** Existing parcels of land are exempt from minimum density requirements.
Source: City of Tupelo, Mississippi, Code of Ordinances and Development Code (Municode Library, library.municode.com)URL: https://library.municode.com/ms/tupelo/codes/development_code?nodeId=CH4BAZODI_4.9MIEREDIMU._4.9.4DESTFetched: 11/1/2026
