Behind-the-wheel training requirements.
Utah Code § 53-3-505.5
in effect53-3-505.5. Behind-the-wheel training requirements.
(1) Except as provided under Subsection (2), a driver education course under this part or Title 53G, Chapter 10, Part 5, Driver Education Classes, that is used to satisfy the driver training requirement under Section 53-3-204 shall require each student to complete at least six hours of behind-the-wheel driving a dual-control motor vehicle with a certified instructor seated in the front seat next to the student driver.
(2) Up to three hours of the behind-the-wheel driving may be substituted as follows:
(a) two hours of range driving on an approved driving range under Section 53G-10-502 equals one hour of the behind-the-wheel driving required under Subsection (1);
(b) two hours of driving simulation practice on a driving simulation device that is fully interactive as set forth in rules made under Section 53-3-505, equals one hour of the behind-the-wheel driving required under Subsection (1); and
(c) four hours of driving simulation practice on a driving simulation device that is not fully interactive as set forth in rules made under Section 53-3-505, equals one hour of the behind-the-wheel driving required under Subsection (1), with a maximum of one hour of the behind-the-wheel driving required under Subsection (1) that may be substituted under this Subsection (2)(c).
(3) The behind-the-wheel driving required under Subsection (1) shall include, if feasible, driving on interstate and other multilane highways.
Amended by Chapter 415, 2018 General Session
Source: Utah Office of Legislative Research and General Counsel (le.utah.gov)URL: https://le.utah.gov/xcode/Title53/Chapter3/53-3-S505.5.html?v=C53-3-S505.5_2018032220180322Fetched: 10/26/2026
