Signs in SR zoning districts.
Tulsa Revised Ordinances tit. 42, § 60.070
in effectSection 60.070 - Signs in SR zoning districts.
A. Applicability. The regulations of this section apply to signs in all SR zoning districts. See also the general regulations of Section 60.040.
B. Signs allowed.
1. On-premise wall signs. On-premise wall signs are allowed in SR zoning districts. Wall signs may not exceed an aggregate area of more than one square foot per linear foot of building wall to which they are attached. Wall signs are not counted against a lot's allowed sign budget, pursuant to Subsection 60.070C.
2. On-premise projecting signs and freestanding signs. On-premise projecting signs and freestanding signs are allowed in SR zoning districts. Projecting signs and freestanding signs are counted against a lot's allowed sign budget, pursuant to Subsection 60.070C. They are subject to the regulations of Subsection 60.070D.
3. On-premise roof signs and off-premise outdoor advertising signs prohibited. On-premise roof signs and off-premise outdoor advertising signs are prohibited in SR zoning districts.
4. Development identification signs. Developments with multiple tenants are allowed a single monument style or freestanding sign with a maximum height of eight (8) feet at each street entrance to the development. Such signage shall count against the maximum sign area permitted on the lot in which it is located, and may not identify any tenant or tenants within the development.
C. Sign budget.
1. Applicability. The sign budget provisions of this subsection govern the maximum aggregate number and combined area of all projecting and freestanding signs on a lot in an SR district, except as otherwise expressly stated.
2. Maximum number. In addition to any sign exceptions allowed pursuant to Section 60.030, lots in SR zoning districts are allowed a maximum of one projecting sign or freestanding sign per street frontage.
3. Maximum area. The maximum aggregate sign area of all projecting and freestanding signs allowed in SR zoning districts may not exceed 0.50 square feet of sign area per linear foot of street frontage or three hundred (300) square feet, whichever is less.
D. Maximum height of projecting signs and freestanding signs.
1. Projecting signs in SR districts may not exceed twenty (20) feet in height or the height of the principal building on the lot, whichever is less. In addition, projecting signs may not extend above the top of the parapet or building wall to which they are attached except in those cases where the height of the parapet or building wall, or the presence of architectural features will not accommodate a projecting sign that is at least three (3) feet in height, in which case the projecting sign may extend above the parapet or building wall for a distance that will permit a projecting sign with a height of three (3) feet.
2. Freestanding signs in the SR zoning district may not exceed thirty (30) feet in height.
E. Dynamic displays. Dynamic displays are prohibited in SR districts except that on a lot occupied by an allowed public, civic or institutional use, either the allowed wall sign or the allowed freestanding sign may include a dynamic display. The allowed dynamic display component may not exceed thirty-two (32) square feet in area, and no more than one (wall or freestanding) dynamic display is allowed per street frontage. The sign area allowed for a dynamic display is not in addition to the maximum sign area allowed for a wall or freestanding sign, but rather is counted as part of the maximum area of a wall or freestanding sign. Dynamic displays are subject to the dynamic display regulations of Section 60.100.
Source: City of Tulsa, Revised Ordinances and City Charter (Municode Library, library.municode.com)URL: https://library.municode.com/ok/tulsa/codes/code_of_ordinances?nodeId=COOR_TIT42ZOCO_CH60SI_S60.070SISRZODIFetched: 10/28/2026
