Area identification and entry feature signs.
Round Rock Zoning and Development Code, art. IX, § 8-85
in effectSec. 8-85. - Area identification and entry feature signs.
(a) For the purpose of area identification, an area identification sign or entry feature sign is permitted provided it meets the following criteria:
(1) Area identification signs and entry feature signs shall be limited to the following uses: Identification of a residential subdivision, a multi-occupant center with ten or more acres, mixed-use districts developed as one development, universities, business parks, or similar developments with multiple buildings.
(2) Signs shall not contain any other form of advertising, and shall identify only the name of the subdivision, district or development.
(3) The sign shall be constructed of stone, brick or metal with a stone or brick base, or other material approved by the Zoning Administrator. The base shall constitute a minimum of 20 percent of the total allowable sign height, with no less than 75 percent of the width of the sign in contact with the ground. No visible plastics shall be permitted for any portion of the sign.
(4) The sign may be located at an off-premises location adjacent to a commercial roadway to identify the primary entrance to the area.
(5) A sign located in the sight visibility triangle shall be no more than three feet in height.
(6) Only shielded external illumination and illumination by halation shall be permitted. No internal illumination shall be permitted.
(7) EMCs shall be prohibited.
(8) One sign shall be permitted for each main entrance to a development. If the entry signage is designed to appear as one unit that is divided by the roadway at a main entrance to a residential subdivision, it may be considered as one sign in compliance with this section, provided that the total sign display area of the signage does not exceed the allowable maximum sign display area for the road type.
(9) In addition to a sign at a main entrance, one decorative feature may be placed in conjunction with the sign. The decorative feature shall not count towards the maximum sign area. In no instance, shall a decorative feature's height exceed ten feet above the maximum building height for the zoning district in which the area identification sign is located. Accessory structures associated with an area identification sign shall be no more than 15 feet tall.
(10) The sign is prohibited in the public right-of-way unless approved in writing by the city.
(11) The sign size shall be as follows:
Area Identification and Entry Feature Signs
Sign Size By Road Type or Special Area | Freeway | Commercial Road | Neighborhood Road | Special Area - OS; DT
Max. Sq. Ft. of sign display area | 100 or 200 | 100 | 75 | 50
Maximum Height | 10' | 6' | 5' | 5'
(12) The maximum sign display area for area identification and entry feature signs on freeways shall be 100 square feet, with the exception of mixed-use and nonresidential areas with a total area of greater than 50 acres which may have signs that are up to 200 square feet.
(13) The applicant shall be required to provide a structural drawing completed by an engineer demonstrating a wind load of 105 mph or greater for any area identification/entry feature sign greater than four feet in height.
(Ord. No. O-2022-234, § II, 7-14-2022)
Source: City of Round Rock, Texas, Code of Ordinances (Municode Library, library.municode.com)URL: https://library.municode.com/tx/round_rock/codes/code_of_ordinances?nodeId=PTIIIZODECO_CH8ZODEST_ARTIXSI_S8-85ARIDENFESIFetched: 11/16/2026
