Plumbing/gas fitting contractor license required.
Minneapolis Code of Ordinances § 278.133
in effect278.133. - Plumbing/gas fitting contractor license required.
No contractor shall undertake or offer to undertake to perform the following unless that contractor holds a valid plumbing/gas fitter contractor license:
(1) Make any connections whatever with the water pipes, water mains, branch sewers, main sewers, drains or other service pipes of the city.
(2) Make any repairs, additions or alterations of any pipe, tap, stopcock, water closet or any other fixture connected with or designed to be connected with the water works or sewer system with the city.
(3) Install, alter or repair any atmospheric burner.
(4) Install, alter or repair any power burner that does not exceed one hundred thousand (100,000) btu's.
(5) Install, alter or repair fuel gas piping, combustion air piping, fuel gas venting and gas burner equipment.
(6) Install, alter or repair any power burner equipment, provided said contractor has in his employ a person holding a valid master gas fitter certificate of competency issued by the City of Minneapolis as defined in this chapter.
At no time may a plumber/gas fitter contractor install, alter, or repair any environmental burner.
Subdivisions (3), (4), (5) and (6) shall not apply to a contractor licensed as a gas fitter contractor. (2002-Or-067, § 7, 7-26-02)
Source: City of Minneapolis, Minnesota, Code of Ordinances, City Charter and Park and Recreation Board Code of Ordinances (Municode Library, library.municode.com)URL: https://library.municode.com/mn/minneapolis/codes/code_of_ordinances?nodeId=COOR_TIT13LIBURE_CH278HEVEAICOGAOIPLGAFIRESTHOWAIN_ARTICOLI_278.133PLGAFICOLIREFetched: 11/2/2026
