For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 19.100.050 — Additional regulations for the RC Zone

Riverside Municipal Code (Supp. No. 33: codified through Ordinance No. 7776, enacted June 23, 2026) · Riverside Municipal Code § 19.100.050

Corpus is an independent public-information project, not the official City of Riverside website. Stable reference: corpuslaw.us/code/a7b67fde-2af4-46d1-aa75-12d7c2a36695

19.100.050 - Additional regulations for the RC Zone.

A. Lot area. 1. The lot area requirements for land Zoned RC varies based on average natural slope and the date the property was zoned RC, as set forth in this section. 2. The lot area requirements for land Zoned RC prior to May 15, 1979, shall be as follows: a. Every lot shall have a minimum width at the building line of 130 feet and a minimum area of one-half acre; provided, however, that the average lot size of the lots shown on any subdivision or parcel map shall be not less than two acres. b. Notwithstanding the provisions of subdivision 1 of this subsection, every lot or parcel located within the Hawarden Drive Special Design Area, generally between Anna Street and Alessandro Arroyo, shall have a minimum width at the building line of 130 feet and a minimum area of two acres; provided, however, that where a lot or parcel located within said area has less width or less area than herein required and was a legally created lot of record prior to June 16, 1977, such lot may be occupied by a single-family residential use if the lot has a minimum area of one-half acre. 3. The lot area requirements for land zoned RC on or after May 15, 1979, shall be as follows: a. Every lot with an average natural slope of less than 15 percent shall have a minimum width at the building line of 130 feet and a minimum area of one-half acre. b. Every lot with an average natural slope from 15 percent to 30 percent shall have a minimum width at the building line of 130 feet and a minimum area of two acres. c. Every lot with an average natural slope over 30 percent shall have a minimum width at the building line of 200 feet and a minimum area of five acres. d. The average lot size of the lots shown on any subdivision or parcel map shall be not less than two acres. e. These provisions shall not apply to lots created pursuant to California Government Code § 66411.7. B. Nonconforming lot size—dwelling unit permitted. Notwithstanding the provisions of subdivision 3 of subsection A above, individuals may construct one single-family dwelling on a lot existing as of May 15, 1979, of less than the minimum lot size required by Section A-3 if such individuals occupy the residence after construction. C. Average natural slope. For the purposes of this section, "average natural slope" shall mean the average natural inclination of the ground surface of a lot or parcel expressed as a percent and as measured by the following formula: S = 0.002296xlxL A where: S = average natural slope in percent I = natural contour interval in feet L = length of natural contours in feet A = acres of property (parcel of record existing on November 13, 1979) 0.002296 = Constant that converts square feet into acres and expresses slope percent. The average natural slope shall be computed from photogrammetric maps, grading permit plans and other data or evidence approved by the Public Works Department. D. Grading. 1. No grading permit shall be issued for any grading in the RC Zone until grading plans and, if required, special drawings showing grading and topography as viewed from critical locations within the neighborhood or community, have been submitted to and approved by the designated Approving or Appeal Authority as set forth in Table 19.650.020 (Approving and Appeal Authority). 2. The Approving and/or Appeal Authority shall consider the following items of particular concern in the review of grading proposals in the RC Zone. Conditions may be applied in the approval of grading plans so as to achieve these objectives pursuant to adopted standards included in the City's Grading Ordinance (Title 17). a. The maximum retention of vistas, natural plant communities and natural topographic features including ridgelines, hilltops, slopes, rock outcroppings, arroyos, ravines and canyons; b. The avoidance of excessive building padding or terracing and cut and fill slopes to reduce the scarring effects of grading; c. The encouragement of sensitive grading to ensure optimum treatment of natural hillside and arroyo features; and d. The encouragement of imaginative grading plans to soften the impact of grading on hillsides including rolled, sloping or split pads; rounded cut and fill slopes and post and beam construction techniques. E. Design review. 1. No building permit shall be issued for any building or structure in the RC Zone until slope planting and irrigation plans and the drawings required by Chapter 19.710 (Design Review) have been submitted to and approved in accordance with the provisions of Chapter 19.710 (Design Review). 2. In addition to the standards established in the Zoning Code and in Chapter 19.710 (Design Review), the Design Review Approving or Appeal Authority shall consider the following items of particular concern in the RC Zone and shall approve the plans and drawings if all applicable standards are met: a. The encouragement of unique site design to ensure optimum treatment of natural hillside and arroyo features and avoid inharmonious, incongruent, conspicuous and obtrusive development; b. The reduction of the scarring effects of grading and the protection of slopes subject to erosion, deterioration or slippage, and fire by the use of appropriate slope planting, irrigation and maintenance; and c. The encouragement of structures that will relate spatially and architecturally with the environment and complement the natural land forms. 3. Conditions may be applied when the proposed development does not comply with applicable standards and shall be such as to bring such development into conformity or the plans and drawings may be disapproved and the Design Review Approving or Appeal Authority shall specify the standard or standards that are not met. 4. All cut and fill slopes exceeding five feet in height shall be suitably landscaped with plant materials and adequately irrigated in accordance with approved plans and maintained on completion of the grading operations. The applicant or developer shall be responsible for the maintenance of all slope planting and irrigation systems until such time as the properties are occupied or until a homeowner's association accepts the responsibility to maintain the landscaping in common areas. F. Subdivisions. To assure compliance with the provisions of this chapter and the Zoning Code where a planned development permit is not required, there shall be submitted along with every tentative subdivision map and parcel map filed for approval in accordance with the provision of Title 18 (Subdivision Code) a preliminary grading plan showing at least one practical usable building site that can be developed in accordance with the provisions of this chapter for each lot or parcel.

(Ord. 7592 § 2(Exh. B), 2022; Ord. 7331 § 4, 2016; Ord. 6966 § 1, 2007)

Ask a question about Riverside law

Corpus searches the Riverside sections it holds and shows the ones that match, with their citations. Free, no sign-in.