For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 21A.44.070 — OFF STREET LOADING FACILITIES

City Code of Salt Lake City, Utah (2026 S-21: current through Ord. 49-26, passed September 15, 2026) · Salt Lake City Code § 21A.44.070

Corpus is an independent public-information project, not the official City of Salt Lake City website. Stable reference: corpuslaw.us/code/ab488d73-1550-4471-988d-5ea67db62fdd

21A.44.070: OFF STREET LOADING FACILITIES:

A. Size Required: 1. Unless otherwise specified, an off street loading berth shall be at least ten feet (10') in width by at least thirty-five feet (35') in length for short berths, and twelve feet (12') in width by at least fifty feet (50') in length for long berths, exclusive of aisle and maneuvering space. Maneuvering aprons of appropriate width and orientation shall be provided and shall be subject to approval by the transportation director. 2. All loading areas shall have a vertical clearance of at least fourteen feet (14'). TABLE 21A.44.070-A: OFF STREET LOADING REQUIREMENTS: Use | Gross Floor Area (Square Feet) | Number and Size of Berths TABLE 21A.44.070-A: OFF STREET LOADING REQUIREMENTS: Use | Gross Floor Area (Square Feet) | Number and Size of Berths Hotels, Institutions, and Institutional Living | 50,000 - 100,000 | 1 short Each additional 100,000 | 1 short Office/Commercial | 50,000 - 100,000 | 1 short Each additional 100,000 up to 500,000 | 1 short Retail | 50,000 - 100,000 | 1 long Each additional 100,000 | 1 long Industrial | 25,001 - 50,000 | 1 long 50,001 - 100,000 | 2 long Each additional 100,000 | 1 long Multi- Family Residential | # of Dwelling Units (Per Building) | Number and Size of Berths 80-200 | 1 short Greater than 200 | 1 additional short B. Location and Design: 1. All loading berths shall be located on the same development site as the use(s) served. 2. No loading berth shall be located within thirty feet (30') of the nearest point of intersection of any two (2) streets. 3. No loading berth shall be located in a required front yard. For properties located in an MU zoning district, loading berths shall only be allowed behind or to the side of a principal building. All service areas shall be screened or located within the building. 4. Each loading berth shall be located and designed to: a. Allow all required vehicle maneuvering and backing movements on-site; b. Minimize conflicts with pedestrian, bicycle, and traffic movement or encroachments into any pedestrian walkway, bicycle lane, public right-of-way, and fire lane; and c. Avoid the need to back into a public street while leaving the site to the maximum extent practicable, as determined by the planning director and the transportation director. 5. Landscaping and screening of all loading berths shall be provided to comply with the requirements of Chapter 21A.40.120, "Landscaping and Buffers" and Chapter 21A.37, "Design Standards". 6. Where a loading berth is illuminated, the light source shall be shielded so that the light source is not directly visible from any abutting property or abutting private or public street. 7. All signs in loading facilities shall comply with Chapter 21A.46, "Signs", and applicable provisions of the Manual on Uniform Traffic Control Devices. 8. All loading berths shall comply with the surfacing standards of the Off Street Parking Standards Manual. (Ord. 47A-25, 2025: Ord. 70-24, 2024: Ord. 12-24, 2024: Ord. 67-22, 2022)

Ask a question about Salt Lake City law

Corpus searches the Salt Lake City sections it holds and shows the ones that match, with their citations. Free, no sign-in.