Fences, walls and hedges.
Coral Springs Land Development Code § 250128
in effectSec. 250128. - Fences, walls and hedges.
(1) Fences and walls constructed or hedges planted within a required setback of a property zoned in the following categories shall not exceed the height specified in Tables (A) and (B), except as provided herein:
Table A - Maximum Height of Fences and Walls (in feet)
Residential and Non-Residential Zoning Districts
Zoning District(s) | Yards
Front | Rear | Side (Interior) | Side (Street)
All Residential | 4 | 6 | 6 | 6
All Non-Residential | 4 | 8 | 8 | 6
Table B - Maximum Height of Hedges (in feet)
Residential and Non-Residential Zoning Districts
Zoning District(s) | Yards
Front | Rear | Side (Interior) | Side (Street)
RS-1 (Estate) | 6 | 10 | 10 | 6
All Other Residential | 4 | 10 | 10 | 6
All Non-Residential | 4 | 10 | 10 | 4
Table C - Approved Fence Types and Materials
Wood | Vinyl Coated | PVC | Molded Polyethylene Composite | Aluminum | Wrought Iron
Shadowbox | P | NP | P | P | NP | NP
Picket | P | NP | P | P | P | P
Tongue-and-Groove with Lattice | P | NP | P | P | NP | NP
Chain link | NP | P | NP | NP | NP | NP
Decorative (Custom) | P | NP | P | P | P | P
P = Permitted Fence Type and Material
NP = Not Permitted Fence Type and Material
If a different type of fence and/or material, other than those listed above, is proposed, the request shall be evaluated by the Architectural Review Committee with final approval by the City Manager or designee.
(2) The following regulations shall apply to wood fencing on the property:
(a) In all zoning districts, only pressure treated pine, redwood and cedar wood shall be acceptable for wood fence construction. The painting or staining of wood fences shall be consistent with the City's approved fencing paint and stain palette.
(b) All wood used for fencing shall have a nominal thickness of five-eighths (⅝) of an inch.
(c) All wooden fences shall have a recognizable finished side facing adjacent properties and rights-of-way.
(3) The following regulations shall apply to chain link fencing on the property:
(a) In all residential zoning districts, no chain link fencing shall be permitted in the front yard area.
(b) Slats made of metal, vinyl or any other material are not allowed in chain link fences including gates for dumpster enclosures, throughout the City of Coral Springs.
(c) All chain link fences must be vinyl coated and green, black or bronze. Bare metal or galvanized chain link fences are prohibited.
(4) The following regulations shall apply to opaque fencing on the property:
(a) If the opaque fence is made of wood, the opaque fence must also comply with the regulations set out in subsection two (2) above.
(b) Opaque fences are prohibited along any property line that is adjacent to any type of waterway.
(c) If an opaque fence is utilized, irrigation heads cannot be blocked to prevent watering of landscaped areas on the opposite side of such fence, including public rights-of-way or linear parks.
(d) Opaque fences must be semi-private fencing (shadowbox and tongue-and-groove with lattice) to provide higher aesthetic appeal and shall meet the following requirements:
1. Shadowbox shall require a minimum distance separation of ¾″;
2. Tongue-and-groove shall require between nine (9) inches and fifteen (15) inches of lattice (excluding framing) at the top of the fence.
(5) The following regulations shall apply whenever a property owner seeks to include barbed wire in fencing or on walls:
(a) Barbed wire shall be restricted use material in every zoning district except A-1.
(b) No barbed wire shall be used in residential districts or on the property line between a residential district and any other district.
(c) In all zoning districts other than A-1 and where consistent with other regulations in the Land Development Code which permit fencing, barbed wire may be utilized at or above a height of six (6) feet that shall be measured from grade.
(d) Barbed wire shall be permitted in the following circumstances:
1. On a construction site where there is an active building permit, provided that said fencing does not obstruct any public easement or right-of-way.
2. On utility sites.
3. On the location of any essential public service where the city manager determines that the risk to persons or property is greater without such fencing than with it.
4. In commercial districts and industrial districts where the outside storage of materials is permitted under the Land Development Code, an application may be made to the director of development services for a permit to utilize barbed wire. The property owner shall provide documentation that the risk to persons and property is substantially greater without the barbed wire than with it. Only upon the property owner meeting the above standard may a permit be issued. Appeal of the director of development services' final decision can be made as provided elsewhere in the Land Development Code.
5. On properties of five (5) acres or more in any district which is used for livestock grazing provided barbed wire shall not be used at a height greater than five (5) feet or within fifteen (15) feet of a street line or platted residential lot line.
(e) It shall be the duty of the property owner to ensure that barbed wire fencing is maintained in a rust-free and taut condition.
(f) Installation of barbed wire in any district shall be evidence that the property owner has expressly assumed all of the risks associated with this material.
(6) The following regulations shall apply whenever opaque screens are mandated by buffer requirements contained in Chapter 25, Section 250441 as amended from time to time.
(a) If a wall is provided to satisfy a requirement for an opaque screen, a concrete or masonry wall shall be provided with a minimum height of four (4) feet or greater as specified in the respective regulations, as measured from the crown of the nearest street right-of-way.
(b) Walls can meander through required buffer areas; however, a minimum of five (5) feet shall be provided between any right-of-way and a wall unless waived by the director of development services or designee.
(c) An opaque screen required for a single-family subdivision shall be located within or on one (1) of the following:
1. On the single-family property lot provided that at least the minimum rear or side yard depth is maintained between the opaque screen and the building;
2. On the boundary or within the area of a landscape buffer area;
3. At a minimum of five (5) feet from the boundary of any right-of-way; or
4. On an abutting B or I zoned plot.
(d) In nonresidential zoning districts, an additional fifteen (15) feet of buffer width beyond the minimum mandated may be provided to eliminate the requirement of an opaque screen. This provision does not apply when a wall is required to satisfy other requirements not related to buffers between dissimilar plots, such as screening overhead doors.
(e) Where the required opaque screen cannot be provided for single-family subdivisions, as determined by the director of development services or designee, the setback on the RS or RD plot shall be increased by fifteen (15) feet.
(f) Earthen berms may be used in lieu of wall height for the purpose of creating the required opaque screen. The berm shall not be located within any required setback for single-family developments. The height of berms shall be measured as the average height of the high points and low points of the berm.
Berms constructed pursuant to this section shall have a maximum slope of one (1) to three (3). If a berm is utilized, the minimum yard shall be provided in addition to any area occupied by the berm.
(7) All portions of fence, post and concrete shall be placed within the plot line excluding zero lot line developments or when a special district has granted written permission for all or a portion of the fence and/or post to lie within its right-of-way (as outlined in section 250128(17)).
(8) Fences, walls or hedges shall be permitted in required yards or required building separations. However, no fence or wall shall be located closer than two and one-half (2½) feet to any street right-of-way. If a utility easement exists adjacent to a street side property line, no setback shall be required. However, if a sidewalk is located in the right-of-way, fences and walls shall be located at least two and one-half (2½) feet from the edge of the sidewalk.
(9) Entry columns at driveways shall be permitted in RS-1, RS-3, RS-4, and RS-5 zoning districts. Columns may exceed the maximum height of fences by no more than twenty (20) per cent.
(10) In all districts, no fence, wall or hedge shall be erected, constructed, maintained or grown to a height exceeding three (3) feet above the street grade nearest thereto within a triangle formed by the intersection of two (2) or more public rights-of-way with two (2) sides of the triangular area being thirty (30) feet in length along the abutting public right-of-way lines, measured from their point of intersection, and the third side being a line connecting the ends of the other two (2) lines.
(11) In all districts, fences, even though otherwise permitted, shall not be connected to any source of power or electrified in any manner whatsoever.
(12) In all residential zoning districts, front yard fencing shall be decorative only.
(13) All walls must include aesthetic design features such as columns, trim, and varying textures.
(14) In all zoning districts, fences shall be screened with a hedge along each perimeter adjacent to a street, canal right-of-way, a linear separate parcel that lies between a public right-of-way and the property line to be fenced or other water body.
Hedges will not be required if the following exists:
A. If a fence adjacent to a canal right-of-way, or other water body, is a black or bronze coated vinyl chain link fence, metal rail fence or wrought iron fence; or
B. If a fence is immediately adjacent to a deck or patio without having any separation between the fence and deck.
(15) The use of different types of fencing material is permitted. However, if the fence is adjacent to a major arterial, as identified in the Broward County Trafficways Plan, the new fencing material shall match that of a directly adjacent neighboring property.
(16) If fifty (50) per cent or more of an existing section of fence is to be repaired or replaced, that section of fence must be repaired or replaced in its entirety and in conformance with the current code.
(17) In such cases where a special district has granted written permission for the fence and landscaping to be placed within their right-of-way, the following conditions shall be met:
(a) Fences and landscaping (where required under this section) shall be placed no closer than twenty (20) feet from the normal water line within the right-of-way as determined by the district, including on-site inspection;
(b) Fences shall meet all screening requirements as listed in this section;
(c) Gates shall be incorporated as directed by the special district to allow access to the canal right-of-way; and
(d) All landscaping to be included in the right-of-way shall be native materials.
(Code 1972, § 20-27; Ord. No. 93-146, § 1, 9-21-93; Ord. No. 94-147, § 3, 11-1-94; Ord. No. 98-111, § 2, 5-5-98; Ord. No. 2004-105, § 2, 3-16-04; Ord. No. 2004-105, § 2, 3-16-04; Ord. No. 2007-115, § 4, 11-20-07; Ord. No. 2013-108, § 2, 7-17-13; Ord. No. 2014-129, § 2, 1-21-15; Ord. No. 2019-121, § 2, 9-4-19; Ord. No. 2023-101, § 118, 4-19-23)
Source: City of Coral Springs, Florida, Code of Ordinances, Charter and Land Development Code (Municode Library, library.municode.com)URL: https://library.municode.com/fl/coral_springs/codes/land_development_code?nodeId=CH25ZOOR_ARTIINGE_S250128FEWAHEFetched: 11/8/2026
