§ 49-1904 — Materials and specifications
Omaha Municipal Code (Supp. No. 100, Update 2: codified through Ordinance No. 44760, enacted August 4, 2026) · Omaha Municipal Code § 49-1904
Corpus is an independent public-information project, not the official City of Omaha website. Stable reference: corpuslaw.us/code/bccf8e74-b34e-4aff-817e-350659ef003f
Sec. 49-1904. - Materials and specifications.
(a) All pressure main lines shall be at least 160 psig polyvinyl chloride pipe manufactured of a virgin material certified by an accredited third party listing agency and installed at a minimum depth of eight inches. (b) All lateral lines after control valves shall be at least 80 psig polyethylene pipe or polyvinyl chloride pipe manufactured of a virgin material certified by an accredited third party listing agency and installed at a minimum depth of eight inches. (c) All polyvinyl chloride pipe joints shall be ring tight or solvent welded according to the pipe manufacturer's specifications. (d) All polyethylene pipe shall be installed with polyvinyl chloride insert fittings using pinch or screw clamps made of stainless steel and clamped over the barbed portion of fitting. All polyvinyl chloride pipe larger than one inch shall be double clamped with one clamp directly over the barbs and one clamp behind the barbs. (e) Saddles may be used only if a gasket is part of the saddle and the saddle is manufactured of brass or plastic material with stainless steel or brass screws. (f) All underground control or manual valves are to be manufactured entirely of a noncorrosive material. (g) All underground lawn sprinkler heads shall be set back at least two feet from the back of the curb or road surface of any adjacent public street or right-of-way.
(Ord. No. 40524, § 1, 10-20-15)
Ask a question about Omaha law
Corpus searches the Omaha sections it holds and shows the ones that match, with their citations. Free, no sign-in.
