Salem Revised Code § 85.010 Location, purpose, types, and specifications of permitted signs.
Sec. 85.010. - Location, purpose, types, and specifications of permitted signs.
When an application therefor is filed and approved in this chapter, it shall be lawful to place in the parking strip or other street area not ordinarily used by pedestrian or for vehicular traffic a directional sign indicating a business district, industrial area, community center, church, institution or manufacturing plant. Three types of directional signs are allowed:
(a) Type One signs shall be made of wood, or other approved material, not more than four feet in width, shall not exceed ten feet in height above the level of the street or curb, upon which may be painted or marked the words "industrial area," "business district," "community center," "church," "hospital," or similar designation with letters not more than five inches high. Attached to or suspended from this sign may be panels or shields containing the name or names of business concerns, factories, churches, or other activities or concerns but only one name to be on any individual panel, and the lettering thereon shall not exceed four inches in height. These panels may be suspended one below the other, and they may extend for the width of the sign. The sign or panels may also contain a directional arrow.
(b) Type Two signs shall consist of a single panel in a size, type, and height determined and approved by the Director, and may contain information designating a specific industrial area, business district, community center, church, hospital, or similar designation. More than one directional panel may be fastened to the same post. Such panel may be pointed on one end.
(c) Type Three signs may be allowed for individual businesses that have alley-only access. The design for Type Three signs shall be approved by the Director, and match the pedestrian wayfinding directional signs.
(Prior Code, § 85.010; Ord. No. 241-66; Ord. No. 43-84; Ord. No. 22-16, § 2, 12-12-2016)
