§ 30-419.5 — Lot area and width
Code of the City of Richmond, Virginia, 2026 (Recodification codified through Ordinance No. 2025-207, adopted October 14, 2025) · Richmond, Va., City Code § 30-419.5
Corpus is an independent public-information project, not the official City of Richmond website. Stable reference: corpuslaw.us/code/c8cf84cb-57ea-4cf3-834b-8b125ead9c59
Sec. 30-419.5. - Lot area and width.
Lot area and lot width regulations in the R-63 district shall be as follows (see Article VI, Division 3 of this chapter): (1) Single-family detached dwellings. Single-family detached dwellings shall be located on lots of not less than 3,000 square feet in area with a width of not less than 25 feet. (2) Single-family attached dwellings. Single-family attached dwellings shall be located on lots of not less than 2,200 square feet in area. Lot width shall be not less than 16 feet, except that the width of any lot at the end of a series of attached units shall be not less than 19 feet. (3) Two-family detached dwellings. Two-family detached dwellings shall be located on lots of not less than 3,200 square feet in area with a width of not less than 27 feet. (4) Two-family attached dwellings. Two-family attached dwellings shall be located on lots of not less than 2,600 square feet in area. Lot width shall be not less than 20 feet, except that the width of any lot at the end of a series of attached units shall be not less than 23 feet. (5) Multifamily dwellings. Multifamily dwellings shall be located on lots of not less than 4,000 square feet in total area and not less than 1,000 square feet in area for each dwelling unit.
(Code 2004, § 114-419.5; Code 2015, § 30-419.5; Code 2020, § 30-419.5; Ord. No. 2006-197-217, § 1, 7-24-2006; Ord. No. 2006-330-2007-12, § 1, 1-8-2007; Ord. No. 2010-18-30, § 5, 2-22-2010)
Ask a question about Richmond law
Corpus searches the Richmond sections it holds and shows the ones that match, with their citations. Free, no sign-in.
