Building height.
Tulsa Revised Ordinances tit. 42, § 90.160
in effectSection 90.160. - Building height.
A. Measurement.
1. Building height is measured as the vertical distance from the average ground elevation along the exterior building wall to the highest point of the subject building. For purposes of measuring height:
a. The average ground elevation is the mid-point between the highest and lowest ground elevations along the exterior building wall; and
b. The highest point of the building is the coping of a flat roof, the top of a mansard roof or shed roof, or the peak of the highest gable of a gambrel or hip roof. For buildings without a roof, height is measured to the highest point of the structure.
Figure 90-19: Building Height Measurement
[image omitted; see the official code]
B. Exceptions.
1. Farm buildings and farm-related structures are not subject to building height limits.
2. Chimneys, elevators, equipment penthouses, monitors, cooling towers and ventilators may exceed maximum building height limits, provided they are not intended for human occupancy and they do not extend more than twenty (20) feet above the top of the principal structure to which they are attached. This twenty-foot limit may be increased through the special exception procedures of Section 70.120.
3. Belfries, clock towers, cupolas, domes, flag poles and spires may exceed maximum building height limits, provided they are not intended for human occupancy and they are not more than one hundred fifty (150) percent taller than the applicable height limit. This one hundred fifty (150) percent limit may be increased through the special exception procedures of Section 70.120.
Source: City of Tulsa, Revised Ordinances and City Charter (Municode Library, library.municode.com)URL: https://library.municode.com/ok/tulsa/codes/code_of_ordinances?nodeId=COOR_TIT42ZOCO_CH90ME_S90.160BUHEFetched: 10/28/2026
