For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 49-515 — Prohibited fittings and connections

Omaha Municipal Code (Supp. No. 100, Update 2: codified through Ordinance No. 44760, enacted August 4, 2026) · Omaha Municipal Code § 49-515

Corpus is an independent public-information project, not the official City of Omaha website. Stable reference: corpuslaw.us/code/dbbf738b-3fda-4b09-81c4-2ffbd0e054c1

Sec. 49-515. - Prohibited fittings and connections.

The following provisions shall be observed: (a) Fittings. (1) No cast-iron double hub fitting shall be used on any soil or waste line. (2) Street fittings may only be used on copper, ABS and PVC systems. (3) The use of saddle hubs and sleeves are prohibited except as permitted in sections 49-1729 and 49-2004. (4) The use of cup or overcast joints, long screws, long screw and lock nut, inverted hub, and bands is prohibited. (5) When any soil, waste or vent pipe is reduced or increased, an approved transition fitting shall be used; tail end pieces or one hub caulked in another to make such increases or reduction in pipe size shall not be used for that purpose. (6) Any fitting or connection which has an enlargement, chamber, or recess with a ledge, shoulder, or reduction of the pipe area, that offers an obstruction to flow through the drain or sewer is prohibited. The size of the drainage piping shall not be reduced in size in the direction of the flow. A four-inch by three-inch water closet connection shall not be considered a reduction in size. (7) See section 49-505 for restricted use of sanitary crosses. (8) The installation of combination lead bends, combination solder nipples, or lead ferrules is strictly prohibited. (9) The use of dielectric unions is prohibited. (b) Procedures. (1) The drilling and burning of holes in or tapping of building drains, soil, waste, vent or water pipes is prohibited. (2) The welding or brazing of pipe or parts into pipes to make fittings either in building drains, soil, waste, vent or water pipes is prohibited. Exception: The extruded joints for copper water piping, the welding of stainless steel pipe and fittings for potable water piping and the drilling of swimming pool piping as approved in this chapter are acceptable. (See sections 49-811, 49-831 and 49-2004.)

(Ord. No. 40524, § 1, 10-20-15)

Ask a question about Omaha law

Corpus searches the Omaha sections it holds and shows the ones that match, with their citations. Free, no sign-in.