59.20. - Definitions.
The following terms whenever used in this article shall have the following respective meanings:
Abrasive blasting is the cleaning or preparation of a surface by forcibly propelling a stream of abrasive material against a surface. It is also the appropriate term for but not limited to the following activities: bead blasting, sand blasting, sand carving, soda blasting, shot blasting, pressure washing, wet abrasive blasting, hydro blasting, vacuum blasting, and dry abrasive blasting.
ASTM was originally known as the American Society for Testing and Materials and is an international standards organization that develops and publishes voluntary consensus technical standards for a wide range of materials, products, systems, and services.
Construction activity includes abrasive blasting, temporary crushing, demolition, maintenance, site preparation, assembly, erection, repair, alteration or similar action, including demolition of buildings or structures with the use of construction equipment, maintenance equipment and temporary crushing equipment.
Construction equipment is any powered vehicle, powered device or mobile device used to supply power used for construction activities or to transport equipment, materials, supplies or debris to or from a construction site. Such equipment includes but is not limited to backhoes, bobcats, bulldozers, compressors, cranes, dump trucks, front end loaders, generators, hammer drills, jackhammers, mobile crushers, pressure washers, sand blasters, and any maintenance equipment.
Construction site is the property where the construction activity is taking place.
EPA shall mean the United States Environmental Protection Agency.
HUD shall mean the United States Department of Housing and Urban Development.
Lead based paint is defined as one (1) milligram per squared centimeter (one mg/cm 2 ) which can be measured using a portable XRF or laboratory analysis, or five thousand (5,000) micrograms per gram (μg/g) which can only be measured by laboratory analysis.
Maintenance equipment is any equipment or device rated at more than five (5) horsepower and used for the repair of buildings and structures, or the maintenance of buildings, structures or properties.
Temporary crushing activities include the crushing, grinding, pulverizing or milling of razed or demolished buildings, structural materials, roadway or other similar materials when performed in an open area by use of portable crushing machinery.
Temporary crushing equipment is any powered vehicle or powered device used for the purposes of crushing, grinding, pulverizing or milling of razed or demolished buildings, structural materials, roadways or other similar materials.
XRF shall mean X-ray fluorescence analyzer used to provide rapid, non-destructive testing of lead and other metal alloys. (2008-Or-097, § 1, 12-12-08)