WAREHOUSE TRIANGLE AREA (WTA)
Tucson Unified Development Code § 5.12.13
in effect5.12.13 WAREHOUSE TRIANGLE AREA (WTA)
The intent of this zone
Zone
A specifically designated area within which uniform regulations govern the use, placement, spacing, and size of land and buildings. Examples include R-1 residential zone and overlay zones such as the Historic Preservation Zone. It is also referred to as a zoning district.
is to allow for and encourage high density infill of the warehouse triangle with transit oriented and mixed use development
Development
Any human alteration to the state of land, including its vegetation, soil, geology, or hydrology, for any residential, commercial, industrial, utility, or other use, such as, but not limited to, clearing, grubbing, or grading of land, and structural improvements, e.g., buildings, walls, fences, signs, and vehicular use areas.
. The DL-AZ will go further than the infill incentive district
District
A zone that has zoning options to encourage transit-oriented development or has specific urban design standards within the City. Examples include the Rio Nuevo District, the Downtown Area Infill Incentive District. A “district” is also referred to as a zoning district.
in granting development
Development
Any human alteration to the state of land, including its vegetation, soil, geology, or hydrology, for any residential, commercial, industrial, utility, or other use, such as, but not limited to, clearing, grubbing, or grading of land, and structural improvements, e.g., buildings, walls, fences, signs, and vehicular use areas.
flexibility and incentives in many areas. Multifamily residential uses will be allowed in current I-1 zone
Zone
A specifically designated area within which uniform regulations govern the use, placement, spacing, and size of land and buildings. Examples include R-1 residential zone and overlay zones such as the Historic Preservation Zone. It is also referred to as a zoning district.
, allowable building heights
Building Height
Same as Structure Height.
Structure Height
The vertical dimension of a structure measured from a specified point on the ground. For information on applying a height standards, refer to Section 6.4.4, Height.
and densities are increased and developments
Development
Any human alteration to the state of land, including its vegetation, soil, geology, or hydrology, for any residential, commercial, industrial, utility, or other use, such as, but not limited to, clearing, grubbing, or grading of land, and structural improvements, e.g., buildings, walls, fences, signs, and vehicular use areas.
will be exempt from non-residential parking requirements.
[image omitted; see the official code]
FIGURE 5.12-WTA-A: MAP OF WAREHOUSE TRIANGLE AREA
[image omitted; see the official code]
A. Warehouse Triangle Area (WTA) Standards
Standards
Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval.
1. Standards
Standards
Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval.
Figure 5.12-WTA-A shows the boundaries of the Warehouse Triangle Area. Warehouse Triangle Area optional standards
Standards
Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval.
apply.
2. Building
Building
A structure having a roof supported by columns, posts, or walls and intended for the shelter, housing, or enclosure of any person, entity, animal, process, equipment, goods, or materials of any kind or nature.
Placement
Building
Building
A structure having a roof supported by columns, posts, or walls and intended for the shelter, housing, or enclosure of any person, entity, animal, process, equipment, goods, or materials of any kind or nature.
placement requirements in the WTA are as shown in Figure 5.12-WTA-B and Table 5.12-WTA-1.
FIGURE 5.12-WTA-B
[image omitted; see the official code]
TABLE 5.12-WTA-1
WAREHOUSE TRIANGLE AREA STANDARDSStandards Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval.
BUILDINGBuilding A structure having a roof supported by columns, posts, or walls and intended for the shelter, housing, or enclosure of any person, entity, animal, process, equipment, goods, or materials of any kind or nature. PLACEMENT STANDARDSStandards Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval.
Build-to-Line (Distance from Property Line) (1)
StreetStreet Any permanent public or private right-of-way, other than an alley, access lane, or parking area access lane, set aside to accommodate vehicular travel lanes, parking lanes, bike lanes, pedestrian facilities, utility areas, and other such design features, whether designated as a street, drive, highway, thoroughfare, road, boulevard, avenue, lane, or place. Side | 0 Ft. | A
Setback (Distance from Property Line)
AlleyAlley Alleys are public ways used for the placement of utilities, refuse collection, or similar public services, and under certain circumstances as provided in the UDC, access to individual properties. Side | 0 Ft. | B
Pedestrian Easement | 0 Ft. | B
Side Yard | 0 Ft. | C
SPECIFIC REQUIREMENTS1. Build-to line is defined as the line at which construction of a buildingBuilding A structure having a roof supported by columns, posts, or walls and intended for the shelter, housing, or enclosure of any person, entity, animal, process, equipment, goods, or materials of any kind or nature. façade is to occur on a lot. A build-to line runs parallel to, and is measured from, streetStreet Any permanent public or private right-of-way, other than an alley, access lane, or parking area access lane, set aside to accommodate vehicular travel lanes, parking lanes, bike lanes, pedestrian facilities, utility areas, and other such design features, whether designated as a street, drive, highway, thoroughfare, road, boulevard, avenue, lane, or place. front property lines and is established to create an even buildingBuilding A structure having a roof supported by columns, posts, or walls and intended for the shelter, housing, or enclosure of any person, entity, animal, process, equipment, goods, or materials of any kind or nature. façade line on a streetStreet Any permanent public or private right-of-way, other than an alley, access lane, or parking area access lane, set aside to accommodate vehicular travel lanes, parking lanes, bike lanes, pedestrian facilities, utility areas, and other such design features, whether designated as a street, drive, highway, thoroughfare, road, boulevard, avenue, lane, or place. . Build-to line applies to streetStreet Any permanent public or private right-of-way, other than an alley, access lane, or parking area access lane, set aside to accommodate vehicular travel lanes, parking lanes, bike lanes, pedestrian facilities, utility areas, and other such design features, whether designated as a street, drive, highway, thoroughfare, road, boulevard, avenue, lane, or place. frontage only (both primary and secondary streets at corner lots) and only applies when new building footprintBuilding Footprint The ground area within the outside edges of the exterior walls of a building at design grade. exceeds 25% of the site area. Where applicable 75% of new buildingBuilding A structure having a roof supported by columns, posts, or walls and intended for the shelter, housing, or enclosure of any person, entity, animal, process, equipment, goods, or materials of any kind or nature. frontage must be located at or near the build-to line.2. StreetStreet Any permanent public or private right-of-way, other than an alley, access lane, or parking area access lane, set aside to accommodate vehicular travel lanes, parking lanes, bike lanes, pedestrian facilities, utility areas, and other such design features, whether designated as a street, drive, highway, thoroughfare, road, boulevard, avenue, lane, or place. side façades must be built to Build-to-Line at a minimum of 75% of the new buildingBuilding A structure having a roof supported by columns, posts, or walls and intended for the shelter, housing, or enclosure of any person, entity, animal, process, equipment, goods, or materials of any kind or nature. frontage, to help define an urban streetStreet Any permanent public or private right-of-way, other than an alley, access lane, or parking area access lane, set aside to accommodate vehicular travel lanes, parking lanes, bike lanes, pedestrian facilities, utility areas, and other such design features, whether designated as a street, drive, highway, thoroughfare, road, boulevard, avenue, lane, or place. frontage, where build-to requirements apply.3. AlleyAlley Alleys are public ways used for the placement of utilities, refuse collection, or similar public services, and under certain circumstances as provided in the UDC, access to individual properties. and pedestrian easement side façades must be built to Build-to-Line at a minimum of 50% of new buildingBuilding A structure having a roof supported by columns, posts, or walls and intended for the shelter, housing, or enclosure of any person, entity, animal, process, equipment, goods, or materials of any kind or nature. frontage, to help define an urban edge to property.
3. Building Heights
Building Height
Same as Structure Height.
Structure Height
The vertical dimension of a structure measured from a specified point on the ground. For information on applying a height standards, refer to Section 6.4.4, Height.
, Floor Uses
Building height
Building Height
Same as Structure Height.
Structure Height
The vertical dimension of a structure measured from a specified point on the ground. For information on applying a height standards, refer to Section 6.4.4, Height.
and floor use requirements in the WTA are as shown in Figure 5.12-WTA-C and 5.12-WTA-2.
FIGURE 5.12-WTA-C
[image omitted; see the official code]
TABLE 5.12-WTA-2
WAREHOUSE TRIANGLE AREA STANDARDSStandards Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval.
BUILDING HEIGHTBuilding Height Same as Structure Height.Structure Height The vertical dimension of a structure measured from a specified point on the ground. For information on applying a height standards, refer to Section 6.4.4, Height. STANDARDSStandards Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval.
Maximum Building HeightBuilding Height Same as Structure Height.Structure Height The vertical dimension of a structure measured from a specified point on the ground. For information on applying a height standards, refer to Section 6.4.4, Height. (1) | 160 Ft. Max or 14 Stories | D
First Floor Ceiling | 12 Ft. Min Clearance | E
Minimum Building HeightBuilding Height Same as Structure Height.Structure Height The vertical dimension of a structure measured from a specified point on the ground. For information on applying a height standards, refer to Section 6.4.4, Height. at Build-to-Line | 25 Ft. | F
Building HeightBuilding Height Same as Structure Height.Structure Height The vertical dimension of a structure measured from a specified point on the ground. For information on applying a height standards, refer to Section 6.4.4, Height. Setback (Distance from Property Line)
High-Rise BuildingBuilding A structure having a roof supported by columns, posts, or walls and intended for the shelter, housing, or enclosure of any person, entity, animal, process, equipment, goods, or materials of any kind or nature. StreetStreet Any permanent public or private right-of-way, other than an alley, access lane, or parking area access lane, set aside to accommodate vehicular travel lanes, parking lanes, bike lanes, pedestrian facilities, utility areas, and other such design features, whether designated as a street, drive, highway, thoroughfare, road, boulevard, avenue, lane, or place. Frontage (2) | 20 Ft. | G
FLOOR USES
Ground Floor (2, 3, 4, 5) | Commercial Services and Retail Trade Uses ready that encourage streetStreet Any permanent public or private right-of-way, other than an alley, access lane, or parking area access lane, set aside to accommodate vehicular travel lanes, parking lanes, bike lanes, pedestrian facilities, utility areas, and other such design features, whether designated as a street, drive, highway, thoroughfare, road, boulevard, avenue, lane, or place. level activity are preferred, but office or residential uses may be used if Commercial Services and Retail Trade Uses are not supported by market demand and contingent on new development Development Any human alteration to the state of land, including its vegetation, soil, geology, or hydrology, for any residential, commercial, industrial, utility, or other use, such as, but not limited to, clearing, grubbing, or grading of land, and structural improvements, e.g., buildings, walls, fences, signs, and vehicular use areas. meeting all other requirements of this table. | H
Upper Floors | Residential or Commercial Services | I
SPECIFIC REQUIREMENTS1. No more than 14 stories and no more than 160 Ft.2. The High-Rise Setback is 20 Ft. (G) at the StreetStreet Any permanent public or private right-of-way, other than an alley, access lane, or parking area access lane, set aside to accommodate vehicular travel lanes, parking lanes, bike lanes, pedestrian facilities, utility areas, and other such design features, whether designated as a street, drive, highway, thoroughfare, road, boulevard, avenue, lane, or place. Frontage above two stories.
4. Lot Coverage, Open Space, Pedestrian Access
Lot coverage, open space and pedestrian access requirements in the WTA are as shown in Figure 5.12-WTA-D and Table 5.12-WTA-3.
FIGURE 5.12-WTA-D
[image omitted; see the official code]
TABLE 5.12-WTA-3
WAREHOUSE TRIANGLE AREA STANDARDSStandards Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval.
LOT COVERAGE, OPEN SPACE AND PEDESTRIAN STANDARDSStandards Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval.
Lot Coverage
Maximum Lot Coverage (1) | 100% |
Open Space
Open Space at Multi-Unit Dwellings (2, 3, 4) | 30 Sq. Ft./DU or 30% of Lot Area (7) |
Open Space Non-Residential (2, 3, 4) | Min. of 30% of Lot Area |
Minimum Landscape Area | 50% of Open Space (9) |
Pedestrian Easement (8)
Maximum Distance from StreetStreet Any permanent public or private right-of-way, other than an alley, access lane, or parking area access lane, set aside to accommodate vehicular travel lanes, parking lanes, bike lanes, pedestrian facilities, utility areas, and other such design features, whether designated as a street, drive, highway, thoroughfare, road, boulevard, avenue, lane, or place. | 125 Ft. | J
Minimum Width | 30 Ft. | K
Pedestrian Access (5)
Pedestrian Access to Public Open Space | Required | L
Main Entrance Location (6) | Primary Street | M
SPECIFIC REQUIREMENTS1. Covered by impervious surfaces such as, but not limited to buildingsBuilding A structure having a roof supported by columns, posts, or walls and intended for the shelter, housing, or enclosure of any person, entity, animal, process, equipment, goods, or materials of any kind or nature. , drives, or parking.2. Usable open space does not need to be located on the ground - green roof or terrace is acceptable.3. Usable open space may be any combination of private and common space.4. Parking may not be counted as open space.5. Adequate shade shall be provided for sidewalks and pedestrian pathways, using shade structuresStructure A physical element constructed or erected with a fixed location on the ground or attached to another physical element having a fixed location at, below, or above grade. Structures include such elements as, but are not limited to, buildings, paved areas, walls, fences, posts, and patios. or vegetation.6. Main entrance locations shall be directly accessed from a sidewalk along a streetStreet Any permanent public or private right-of-way, other than an alley, access lane, or parking area access lane, set aside to accommodate vehicular travel lanes, parking lanes, bike lanes, pedestrian facilities, utility areas, and other such design features, whether designated as a street, drive, highway, thoroughfare, road, boulevard, avenue, lane, or place. rather than from a parking lot.7. Open space at multi-dwelling units is 30 Sq. Ft. per dwelling unit or 30% of lot area, whichever is greater.8. ProjectsProject A development, consisting of one or more contiguous lots, planned and constructed to function as a single entity, utilizing common or shared facilities, structures, parking, and vehicular and pedestrian access. that develop 50% or more of the land area within the Mid-block Pedestrian Easement ZoneZone A specifically designated area within which uniform regulations govern the use, placement, spacing, and size of land and buildings. Examples include R-1 residential zone and overlay zones such as the Historic Preservation Zone. It is also referred to as a zoning district. (see map/plan above) shall set aside and develop a mid-block pedestrian passage and easement.9. Minimum landscape requirement applies only to common area open space.
5. Building
Building
A structure having a roof supported by columns, posts, or walls and intended for the shelter, housing, or enclosure of any person, entity, animal, process, equipment, goods, or materials of any kind or nature.
Massing Standards
Standards
Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval.
Building
Building
A structure having a roof supported by columns, posts, or walls and intended for the shelter, housing, or enclosure of any person, entity, animal, process, equipment, goods, or materials of any kind or nature.
Massing Standards
Standards
Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval.
in the WTA are as shown in Figure 5.12- WTA-E and Table 5.12- WTA-4.
FIGURE 5.12-WTA-E
[image omitted; see the official code]
TABLE 5.12-WTA-4
WAREHOUSE TRIANGLE AREA STANDARDSStandards Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval.
BUILDINGBuilding A structure having a roof supported by columns, posts, or walls and intended for the shelter, housing, or enclosure of any person, entity, animal, process, equipment, goods, or materials of any kind or nature. MASSING STANDARDSStandards Design principles, criteria, and specifications that describe the manner in which development and related improvements are accomplished in order to obtain development approval.
Articulation
Maximum unbroken buildingBuilding A structure having a roof supported by columns, posts, or walls and intended for the shelter, housing, or enclosure of any person, entity, animal, process, equipment, goods, or materials of any kind or nature. mass (1) | 50 Ft. Max. | N
View Corridors
Mid-Rise Façade (2) | 25% of Façade Min. | O
High-Rise Façade (3) | 150 Linear Ft. Unbroken Max. | P
Mid-Rise Height | 50 Ft. Max or 4 Stories | Q
Build Reduction (High Rise)
Bulk Reduction Setback (4) | 12 Ft. Min. | S
Bulk Reduction Required Area | 50% of Façade Min. | R
Bulk Reduction ZoneZone A specifically designated area within which uniform regulations govern the use, placement, spacing, and size of land and buildings. Examples include R-1 residential zone and overlay zones such as the Historic Preservation Zone. It is also referred to as a zoning district. | Required above 4th Floor | T
SPECIFIC REQUIREMENTS1. Any buildingBuilding A structure having a roof supported by columns, posts, or walls and intended for the shelter, housing, or enclosure of any person, entity, animal, process, equipment, goods, or materials of any kind or nature. over 50 Ft. wide must be broken down to read as a series of buildingsBuilding A structure having a roof supported by columns, posts, or walls and intended for the shelter, housing, or enclosure of any person, entity, animal, process, equipment, goods, or materials of any kind or nature. no wider than 50 Ft. (N) and should include a variety of façades. 2. To preserve view corridors, a minimum of 25% of the façade must be set aside as mid-rise (O), and the mid-rise façade may not exceed 4 stories or 50 Ft. (Q) in height. On corner lots this requirement applies to one streetStreet Any permanent public or private right-of-way, other than an alley, access lane, or parking area access lane, set aside to accommodate vehicular travel lanes, parking lanes, bike lanes, pedestrian facilities, utility areas, and other such design features, whether designated as a street, drive, highway, thoroughfare, road, boulevard, avenue, lane, or place. only. 3. High-rise façades of more than 150 continuous linear feet (P) must be broken by a mid-rise façade (O) not to exceed 4 stories or 50 Ft. (Q) in height as shown in Figure above. 4. A step-back bulk reduction area a minimum of 12 ft. in depth (S) is required for at least 50% of the façade (R). Bulk reduction is required above the fifth floor (T). See figures above.
(Ord. 11246, 2/18/2015; Am. Ord. 11977, 12/20/2022)
Source: City of Tucson, Tucson Code (Charter and General Ordinances) and Unified Development Code (American Legal Publishing, codelibrary.amlegal.com)URL: https://codelibrary.amlegal.com/codes/tucson/latest/tucson_az_udc/0-0-0-23421Fetched: 10/28/2026
