Calculation of required parking.
Tulsa Revised Ordinances tit. 42, § 55.040
in effectSection 55.040. - Calculation of required parking.
In determining the number of parking spaces required, the following calculation rules apply:
A. Multiple uses. Lots containing more than one use or tenant must provide parking in an amount equal to the total aggregate number of spaces required for each use or tenant on the lot except when a shared parking arrangement is approved in accordance with Subsection 55.050J.
B. Calculations. In calculating the number of parking spaces required for uses subject to a minimum parking ratio of "x" spaces per 1,000 square feet, first divide the floor area of the subject use by 1,000 and then multiply the result by "x." If, for example, a minimum parking ratio of 3.33 spaces per 1,000 square feet is applied to a use occupying 500 square feet of floor area, the minimum parking requirement for that use would be calculated as follows: (500 sq. ft. ÷ 1,000) × 3.33 = 0.5 × 3.33 = 1.665, which is rounded up to 2 spaces (see Section 90.010).
C. Floor area exemptions. When minimum off-street parking ratios exempt the first increment of floor area, such exemption is credited to each individual use in a multi-tenant development.
D. Occupancy- or capacity-based standards. For the purpose of computing parking requirements based on employees, students, members, residents or occupants, calculations must be based on the average number of persons working on any single shift, the average enrollment or membership or the building code-rated capacity, whichever is applicable.
E. Bench seating. For the purpose of calculating parking requirements based on seating, each twenty-two (22) linear inches of bench or pew length is equivalent to one seat.
Figure 55-1: Bench Seating
[image omitted; see the official code]
F. Outdoor customer seating/dining areas. Any outdoor customer seating/dining area exceeding ten (10) percent of a bar, restaurant or other use's indoor floor area must be counted as floor area for purposes of determining off-street parking requirements.
G. Unlisted uses. Upon receiving a development application for a use not specifically listed in an off-street parking schedule, the development administrator is authorized to apply the off-street parking ratio specified for the listed use that is deemed most similar to the proposed use or establish a minimum off-street parking requirement for the proposed use in accordance with Subsection 55.040H.
H. Establishment of other parking ratios. The development administrator is authorized to establish required minimum parking ratios for unlisted uses and in those instances where authority to establish a requirement is expressly granted. Such ratios must be established on the basis of (1) a similar use/parking determination (as described in Subsection 55.040G.), (2) on parking data provided by the applicant, or (3) other information available to the development administrator. Parking data and studies must include estimates of parking demand based on reliable data collected from comparable local uses or on external data from credible research organizations, such as the Urban Land Institute (ULI) and the Institute of Transportation Engineers (ITE). Comparability will be determined by density, scale, bulk, area, type of activity and location. Parking studies must document the source of all data used to develop recommended requirements.
Source: City of Tulsa, Revised Ordinances and City Charter (Municode Library, library.municode.com)URL: https://library.municode.com/ok/tulsa/codes/code_of_ordinances?nodeId=COOR_TIT42ZOCO_CH55PA_S55.040CAREPAFetched: 10/28/2026
