Streets.
Round Rock Zoning and Development Code, art. II, § 6-11
in effectSec. 6-11. - Streets.
(a) Street classification and characteristics.
(1) Local streets. The purpose of a local street is to provide lot street frontage and carry traffic to a higher classification street. Local streets are divided into three subcategories: Local-residential, local-nonresidential or local-rural. Unless approved by the public works director, a local street shall not connect to two separate higher classification streets or connect directly to arterial streets. Local streets may be designated as private streets.
(2) Collector streets. Collector streets are divided into two subcategories: Local and major. The purpose of collector streets is to convey traffic from intersecting local streets and to expedite the movement of traffic to an arterial street or other collector street. Generally, major collector streets shall not permit on-street parking. No collector street in a residential development shall be designated as a private street. Collector streets in nonresidential private street developments may be designated as private streets.
(3) Arterial streets. The purpose of an arterial street is to carry high volumes of through traffic. Arterial streets serve as a link between major activity centers within the urban area. Access is usually limited to intersections, multifamily developments and commercial driveways. All arterial streets are designated in the general plan. An arterial street shall not end as a cul-de-sac. Generally, arterial streets shall not permit on-street parking. No arterial street shall be designated as a private street.
(b) New streets.
(1) Right-of-way. A developer shall dedicate or convey at the city's option the amount of right-of-way for each type of street as stated in the Design and Construction Standards. Except as provided below, the developer must dedicate or convey the required right-of-way for all streets within the subdivision as shown on the plat. The city may reduce the amount of right-of-way dedication for an arterial street based on the design consideration, existing land uses, existing development of adjoining properties, and dimensions of the proposed addition or subdivision. In all cases, the amount of right-of-way dedicated for any one street within the addition or subdivision shall not exceed 120 feet wide or 15 percent of the total acreage on the plat submitted.
(2) Street improvements. All public and private streets shall be designed and built in accordance with the Design and Construction Standards. The developer must construct the full cross section of the arterial streets designated on the general plan which are located within the subdivision unless the TIA for the addition or subdivision documents a need for a lesser cross section. In such a case, the developer shall construct the cross section required by the TIA.
(c) Private streets. Private streets may be permitted, subject to the provisions of Secs. 4-56 and 6-19.
(d) Substandard existing street right-of-way. Whenever a proposed subdivision abuts an existing street that has a substandard right-of-way width for either the existing street or for a future street, the developer shall dedicate the additional right-of-way for the existing street or future street. The developer shall dedicate one-half of the amount required for the type of street to be upgraded measured from the existing centerline of the right-of-way or up to 15 percent of the total acreage of the addition or subdivision, whichever is less. The city may reduce the amount of right-of-way dedication requirement based on design consideration, existing land uses, existing development of adjacent properties, and dimensions of the proposed addition or subdivision.
(e) Stub streets.
(1) Except for gated communities, a proposed subdivision or addition must provide access to adjacent land subdivided by stubbing appropriate streets to the boundaries of the proposed addition or subdivision. When the abutting land is platted, the developer shall integrate the stubbed streets into the existing traffic system of streets in a logical manner as well as continue the same street classification of the stub street. The developer shall present a schematic plan to demonstrate how the stub street will eventually extend through the adjacent property and connect with a collector or arterial street.
(2) Temporary paved turnarounds shall be provided at the end of stubbed streets which are more than 250 feet long.
(f) Culs-de-sac.
(1) Local streets may terminate in a cul-de-sac. Collectors and arterial streets may not terminate in a cul-de-sac.
(2) Except as provided herein, the maximum length of a cul-de-sac street shall be 600 feet, measured from the centerline of the nearest intersecting outlet street to the centerpoint of the turnaround; except that a longer length may be allowed upon a recommendation by the fire department and if the PDS director determines any of the following:
a. That no secondary access can be reasonably provided to the portion of the subdivision which is to be served by the cul-de-sac;
b. That limited access to the subdivision is due to a topographical condition on the property or a particular physical surrounding; or
c. That the cul-de-sac is temporary and the street is planned to extend to the adjacent property.
(g) Curbing. All streets shall have standard curbing and gutter except for the local-rural street classification where ribbon curb is allowed. All raised medians and islands located within the street pavement shall be bordered by standard curb and gutter, unless otherwise approved by the public works director. All concrete curb and gutter shall be installed and constructed according to the Design and Construction Standards.
(h) Curb ramps.
(1) Curb ramps are required within a street wherever a sidewalk or pedestrian route intersects with a curb. The design and construction of curb ramps shall be in accordance with the Design and Construction Standards, and shall meet the Texas Accessibility Standards, administered by the state department of licensing and regulation and the Americans with Disabilities Act of 1990, as amended.
(2) Whenever a sidewalk or pedestrian route crosses a raised median, the raised median shall be cut through level with the street, or shall have curb ramps at both median curbs plus a level area at least four feet long between the curb ramps in the median.
(i) Access. All lots shall be provided with frontage on an existing or proposed public or private street.
(Ord. No. O-2024-168, § VIII, 6-27-2024; Ord. No. O-2024-266, § XXXIV, 9-26-2024)
Source: City of Round Rock, Texas, Code of Ordinances (Municode Library, library.municode.com)URL: https://library.municode.com/tx/round_rock/codes/code_of_ordinances?nodeId=PTIIIZODECO_CH6STTH_ARTIISTDEST_S6-11STFetched: 11/16/2026
