Fees.
Round Rock Code of Ordinances § 44-188
in effectSec. 44-188. - Fees.
(a) All property owners shall:
(1) Have the assembly tested as required by a licensed tester upon installation of an assembly. All property owners shall pay the testing fee to the tester upon completion of the initial testing of an assembly. If a property owner fails to test the device upon installation, the director may perform the test and assess a testing fee of $75.00 plus the actual cost of the test for each separate assembly device on which the director performs a test.
(2) If an assembly is deemed not to be working properly upon the initial inspection or initial testing of the assembly after installation, the director shall have the necessary repairs and/or adjustments made immediately and shall retest the assembly. The property owner will then be required to pay the actual cost of the retest and repair required.
(b) All water customers shall:
(1) Have the assembly routinely tested as required by a licensed tester. Upon receipt of a notification that testing is required, all water customers shall have the assembly tested by a licensed tester and pay the testing fee to the tester upon completion of the testing.
(2) If the assembly is located on residential premises and categorized as "low hazard," the water customer may in lieu of having the assembly tested, choose to notify the director within the timeframe set forth in the notification, to lock the assembly in the closed position and tag with a do not operate notice. Removal of this tag and/or lock is a violation of this section.
(3) If a water customer fails to test the device or notify the director to lock the assembly within the required timeframe, the director may perform the test and assess a testing fee of $75.00 plus the actual cost of the test for each separate assembly device on which the director performs a test.
(4) If an assembly is deemed not to be working properly after testing, the director shall have the necessary repairs and/or adjustments made immediately and shall retest the assembly. The property owner will then be required to pay the actual cost of the retest and repair required.
(5) If the assembly is located on a residential premises and categorized as "low hazard," after an assembly is tested and deemed to not be working properly, the water customer can choose to immediately notify the director to lock the assembly in the closed position and tag with a do not operate notice in lieu of a retest. Removal of this tag and/or lock is a violation of this section.
(Code 1995, § 10.716; Ord. No. O-2015-2423, § I, 5-14-2015; Ord. No. O-2016-3846, § I, 10-27-2016)
Source: City of Round Rock, Texas, Code of Ordinances (Municode Library, library.municode.com)URL: https://library.municode.com/tx/round_rock/codes/code_of_ordinances?nodeId=PTIICOOR_CH44UT_ARTVIICRCOCOPR_S44-188FEFetched: 11/16/2026
