For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 17.2 — Density controls in Lincoln Village South of Oakwood

Code of Ordinances of the City of Huntsville, Alabama (Supp. No. 30 (codified through Ord. No. 26-196, adopted March 12, 2026) with enacted ordinances through Ord. No. 26-837 (September 24, 2026) applied from official council minutes and ordinance copies) · Huntsville Code of Ordinances, App. A, art. 17, § 17.2

Corpus is an independent public-information project, not the official City of Huntsville website. Stable reference: corpuslaw.us/code/eed53ffc-c598-469d-a9cf-79f74d64e771

17.2. - Density controls in Lincoln Village South of Oakwood.

The following yard, density, and height requirements shall be observed: 17.2.1 For Single-Family and Two-Family Dwellings—except as provided for in Article 73 hereof. (1) Minimum required lot area shall be as platted in Lincoln Park Second Addition (Plat Book v. 1, Page 299) and the minimum required lot area for newly created lots shall be 4,800 square feet. (2) Minimum required lot width: 35 feet. (3) Minimum required lot frontage: 20 feet. (4) Required depth of front yard shall match the front line setback of the existing structures on the block. If there are no existing dwellings on the block, the front setback shall be no less than ten feet nor more than 20 feet. (See Section 73.7.4) (5) Minimum required depth of rear yard: Five feet. (6) A minimum separation of six feet two inches shall be maintained between the side walls of dwellings on adjoining lots. Minimum required depth of side yard to street: Three feet. Minimum required depth of side yard to alley: One foot. (7) Maximum stories: One. (8) Maximum height: 15 feet. (9) Maximum width of single-family dwellings: 35 feet. (10) Maximum width of each unit in a two-family dwelling: 18 feet. 17.2.2. For multiple-family dwellings. (1) Multiple-family dwellings shall be permitted on Lots 19, 24, 31, 32, 33, 34, 43, 56, 57 & 58 as platted in Lincoln Park Second Addition (Plat Book v. 1, Page 299). Buildings having three or more residential units shall be configured as an unbroken line of housing. (2) Minimum required lot width: 100 feet. (3) Minimum required lot frontage: 20 feet (4) Required depth of front yard shall match the front line setback of the existing structures on the block. If there are no existing dwellings on the block, the front setback shall be no less than ten feet nor more than 20 feet. (See Section 73.7.4) (5) Minimum required depth of rear yard: Ten feet. (6) A minimum separation of six feet two inches shall be maintained between the side walls of dwellings on adjoining lots. Minimum required depth of side yard to street: Five feet. Minimum required depth of side yard to alley: Three feet. (7) Maximum stories: One. (8) Maximum height: 15 feet. 17.2.3. For nonresidential buildings. (1) Nonresidential buildings shall be permitted only on lots that are occupied, at the time of this amendment, by nonresidential uses permitted in the district; provided, however, no nonresidential buildings shall be permitted on lots previously or currently used for residences. (2) Minimum required lot width: 100 feet. (3) Minimum required lot frontage: 20 feet. (4) Minimum required depth of front yard: 30 feet. (5) Minimum required depth of rear yard: Ten feet. (6) Minimum required depth of side yards: 25 feet. (7) Maximum stories: Two and one-half. (8) Maximum height: 30 feet. 17.2.4. Parking requirements. (1) Residential parking shall be permitted only in rear yards and on street. Detached garages are permitted in the rear yard if access is from an alley. No parking, garages, or garage access shall be permitted in any front or side yard. (2) Nonresidential parking shall not be allowed in any required yard. Five visitor parking spaces may be located in front of a building but not in the required front yard. 17.2.5. Design requirements for dwellings. (1) In order to maintain the unique building character of the residential structures in Lincoln Park Second Addition and to preserve the identity and sense of place of this historic mill village, the following design requirements shall apply to existing residential structures: (a) Where a two-family dwelling is combined to form a single-family dwelling, the original facade of the two-family dwelling shall be maintained as that of a two-family dwelling with the doors, windows and porches remaining in their original configuration. (b) Where two dwelling units of a multiple-family dwelling are combined to form one dwelling unit, the original facade of the multiple-family dwelling shall be maintained with the doors, windows and porches remaining in their original configuration. The facade of the multiple-family dwelling shall maintain the appearance of having dwelling units with a maximum width of 18 feet per dwelling unit. (c) All dwellings shall have their primary entrance facing the street and each unit shall have a separate entry porch. (2) In order to maintain the unique building character of the residential structures in Lincoln Park Second Addition and to preserve the identity and sense of place of this historic mill village, the following design requirements shall apply to newly constructed residential structures: (a) New construction shall follow the size, style and placement of the doors and windows and maintain the rhythm of the porch orientation of the existing historic residential dwellings. (b) The exterior of newly constructed multiple-family dwellings shall maintain the appearance of having a maximum width of 18 feet per dwelling unit with the doors, windows and porches having the same configuration and orientation of the existing historic multiple-family dwellings. (c) All dwellings shall have their primary entrance facing the street and each unit shall have a separate entry porch.

(Ord. No. 06-640, § 1, 8-24-2006)

Ask a question about Huntsville law

Corpus searches the Huntsville sections it holds and shows the ones that match, with their citations. Free, no sign-in.