16.12.030 - Tentative map requirements.
The tentative map shall contain the following information:
A. The name or title of the proposed subdivision;
B. Name and address of record owner(s) and developer(s);
C. Name and address of the firm and/or individual in responsible charge of the technical correctness of the map. If that person is a design professional in the state of Nevada, the plans shall be sealed in accordance with the Nevada Administrative Code of the appropriate discipline;
D. Present and required zoning of the proposed subdivision;
E. Sufficient legal description of the land which identifies the location, including assessor's parcel number(s), exterior subdivision boundary dimensions and approximate acreage;
F. Vicinity map showing project location, including north arrow;
G. The date of preparation, the map scale and north arrow;
H. A legend shall be shown clarifying all abbreviations, markings and lines delineated on the map. The lettering must be so placed as to be read from the bottom or right-hand side of the sheet and the north arrow directed away from the reader;
I. Topography for the entire subdivision, obtained by actual survey, with contour intervals not to exceed two feet on-site and extending one hundred (100) feet beyond the tract boundary. All topography is to be based upon an approved NAVD 88 benchmark, and said benchmark is to be identified thereon;
J. Locations, names, present widths and improvements of all existing streets and rights-of-way adjacent to or within three hundred (300) feet of the subdivision tract boundary;
K. Adjacent property information, including but not limited to, property lines, subdivision name(s), phase and unit, assessor's parcel numbers, locations of existing structures and facilities, and other existing conditions;
L. The proposed subdivision in its entirety, including lot numbers and approximate dimensions of each lot, shown at a suitable scale so that all information required thereon is clear and legible;
M. The location, names, approximate grades and right-of-way widths of all proposed streets within the proposed subdivision;
N. Cross sections of all proposed streets, including pavement widths, sidewalk widths and locations, block wall locations;
O. The width, purpose and location of all existing and proposed easements for drainage, sewage, public utilities and other purposes;
P. Approximate radii of all curves;
Q. The location and outline, to scale, of each existing building or other structure within the proposed subdivision, noting whether or not such building or structure is to be removed or remain in the development of the subdivision and other existing physical features which would influence the layout or design;
R. The location, size and direction of flow of all existing and proposed water courses, stormwater drainage facilities, culverts, drain pipes and natural drainage channels within three hundred (300) feet of the subdivision tract boundary;
S. The location and size of existing and proposed water mains;
T. The location and size of existing available public sanitary sewers and the location and size of proposed sewers showing direction of flow;
U. Proposed sites to be reserved or dedicated for public parks, schools, playgrounds and/or other public uses;
V. Proposed cross-section and locations of all perimeter walls and landscape areas;
W. A statement regarding restrictive covenants which the developer intends to enforce;
X. The location and description of all existing power, telephone, telecommunications, cable, gas, and other public utility facilities;
Y. The location and width of bicycle/trail paths and routes as shown on the master plan or adopted specific plans;
Z. The location of all existing and proposed bus stops and/or turnouts; and
AA. All known geologic hazards shall be shown. Geological hazards such as fault lines and/or fissures affecting residential structures may substantially alter the tentative map layout and require the submission of a revised tentative map which must be approved by the city prior to acceptance of the civil improvement plans. The footprint of proposed residential structures shall be plotted on all lots impacted by faults and/or fissures.
(Ord. 2246 §§ 1, 2 (part), 2006)