TH (Townhouse) district.
Round Rock Zoning and Development Code, art. II, § 2-20
in effectSec. 2-20. - TH (Townhouse) district.
(a) Purpose. To establish and preserve areas of medium intensity land use devoted to moderate density residential development. This district often provides a transition between lower intensity residential uses and more intensive uses. Townhouses may be developed in either a common-lot or single-lot (fee simple) configuration.
(b) Permitted uses. Uses permitted in the TH district may be found in Sec. 2-25.
(c) Lot and building dimensional standards. Property and buildings in the TH district shall conform to the standards found in Sec. 2-26, with the following supplementary notes:
(1) Townhouses shall not exceed 12 dwelling units per acre.
(2) A side setback of zero feet is allowed only for internal attached units with a common wall.
(3) End units shall have a 10-foot side setback.
(4) Accessory buildings shall have a five (5) foot setback, except that common walls are not required to have a setback.
(5) Parking areas for common-lot townhouses shall be separated from adjacent properties by a 15-foot wide landscape buffer, in accordance with Sec. 8-10.
(6) Recreational uses with overhead illumination such as swimming pools, tennis courts, ballfields, or playground areas are prohibited within 50 feet of any adjacent SF-R, SF-1, SF-2, SF-3, SF-D, or TF district lot line.
(7) A maximum of five percent (5%) of the total number of dwelling units within a single townhouse development may be within residential structures consisting of two (2) dwelling units sharing a common wall.
(8) Buildings with a height of three (3) stories that are adjacent to existing or planned single or two-family lots, shall have a minimum setback of twenty (20) feet, and the following shall apply:
a. The setback area shall be subject to the following requirements:
1. Use of the setback area shall be limited to fencing, landscaping, and natural drainage.
2. Buildings, parking areas, refuse containers and any similar improvements shall not be permitted within the setback area.
3. A pre-cast concrete panel or architectural concrete masonry unit (CMU) fence shall be required within the setback area in accordance with subsection 8-2(f)(1).
4. A landscape buffer of at least eight (8) feet wide with one large tree with a minimum of three (3) caliper inches per 50 linear feet and one medium tree with a minimum of two (2) caliper inches per 50 linear feet shall be required within the setback area. The trees shall be selected from the list of approved evergreen tree species in Appendix B of the Tree Technical Manual, City of Round Rock.
b. All buildings shall be oriented so that no front or rear of the structures face the adjacent existing or planned single-family or two-family lots.
c. No balconies shall face the adjacent existing or planned single-family or two-family lots.
(d) Supplementary development standards. In addition to the standards found in chapter 8 of this Code, the following regulations apply to the TH district:
(1) Garages. Garages shall not face a public street, nor shall garages be permitted in any street yard.
(2) Fences. Lot fences shall be constructed of the following materials: brick, natural stone, simulated stone, architectural CMU, or wrought iron. A brick, natural stone, simulated stone, or architectural CMU fence shall be installed abutting single-family or two-family uses. View fencing shall be installed where abutting a park, trail, or open space, in accordance with Section 8-35.
(3) Light fixture height. The height of a light fixture shall not exceed 20 feet.
(e) Townhouse design standards. The following design standards apply to all buildings in the TH district. These standards are intended to ensure an attractive built environment in Round Rock. These standards supplement any district-specific standards. Alternative design standards may be approved by the zoning administrator in order to permit a more flexible or creative design.
(1) Building elevation variation. Any wall in excess of 60 feet in length shall include offsets of at least two feet in depth, to preclude a box design. There shall be no less than one offset for every 40 feet of horizontal length.
(2) Exterior wall color finishes. Day-glo, luminescent, iridescent, neon or similar types of color finishes are prohibited.
(3) Glass. Mirrored glass with a reflectivity of 20 percent or more is prohibited on the exterior walls and roofs of all buildings and structures.
(4) Orientation requirements. Building elevations that face a public street shall have at least 15 percent of the wall facing the street consist of windows and/or entrance areas.
(5) Windows. Windows shall be provided with trim. Windows shall not be flush with exterior wall treatment. Windows shall be provided with an architectural surround at the jamb, header and sill.
(6) Roofing. Portions of the roof shall be permitted to be flat to provide for mechanical equipment wells or roof decks, provided that such flat areas are screened by pitched sections of the roof.
(7) Special design features. All buildings, other than garages, shall be designed to include varied relief to provide interest and variety and to avoid monotony. This shall include details that create shade and cast shadows to provide visual relief to the buildings. A minimum of five (5) features from the following list shall be incorporated into the building design:
a. Bow window.
b. Bay window.
c. Arched window.
d. Gable window.
e. Oval or round windows.
f. Shutters.
g. Arched entry, balcony or breezeway entrance.
h. Stone or brick accent wall.
i. Decorative stone or brick band.
j. Decorative tile.
k. Veranda, terrace, porch or balcony.
l. Projected wall or dormer.
m. Variation of roof lines on the building.
n. Decorative caps on chimneys.
o. Other feature as approved by the zoning administrator.
(f) Amenities. At least one (1) amenity accessible to all residents shall be provided for each new townhouse development with 30 or more dwelling units. Additional amenities shall be included at the following rate:
Number of dwelling units | Minimum number of amenities
0—29 | 0
30—59 | 1
60—89 | 2
90—120 | 3
Greater than 120 | 4
Amenities include but are not limited to the following:
(1) Playground equipment,
(2) Fenced dog park, to measure no smaller than 2,500 square feet, with minimum depth 25 feet,
(3) Private fitness facility*,
(4) Picnic area, to contain no fewer than two tables and two cooking grills,
(5) Swimming pool,
(6) Business center, to contain no less than one computer, printer, fax machine, copier, and scanner (printer, fax machine, copier, and scanner may be integrated into a single device), available for resident use*,
(7) Tennis court,
(8) Basketball court,
(9) Volleyball court,
(10) Kitchen available for resident use*,
(11) Social room available for resident use*.
* These amenities may be located in the amenity center and each one qualifies toward the amenity requirement.
(g) Design standard incentive. A Developer shall be allowed to have a townhouse development containing up to 14 dwelling units per acre, so long as all of the following conditions are met:
(1) The ground floor of all buildings shall be a minimum of 75 percent natural stone, simulated stone, or brick.
(2) A minimum of two different materials shall be used on each structure, and each material used shall comprise no less than 20 percent of the exterior wall finish.
(3) No more than 33 percent of the building façade may be fiber cement or architecturally finished steel or metal.
(4) Roofing materials shall consist of 25-year architectural dimensional shingles, tile (clay, cement, natural, or simulated stone), non-reflective pre-finished metal, or reflective metal such as copper or other similar metals as approved by the zoning administrator.
(h) Single-lot (fee simple unit) additional restrictions.
(1) Garage requirements. Garages shall not protrude toward the street greater than six (6) feet beyond the ground floor of the front building façade. All garages that protrude beyond the ground floor of the front building façade shall contain living space above them.
(Ord. No. O-2019-0463, § VIII, 11-26-2019; Ord. No. O-2020-0158, § II, 6-11-2020; Ord. No. O-2022-053, § I, 2-10-2022)
Source: City of Round Rock, Texas, Code of Ordinances (Municode Library, library.municode.com)URL: https://library.municode.com/tx/round_rock/codes/code_of_ordinances?nodeId=PTIIIZODECO_CH2ZODIUSRE_ARTIIREDI_S2-20THTODIFetched: 11/16/2026
