§ 2-45 — LI (Light Industrial) district
Code of Ordinances, City of Round Rock, Texas (Supp. 27: codified through Ordinance of August 13, 2026 (online updated November 5, 2026)) · Round Rock Zoning and Development Code, art. IV, § 2-45
Corpus is an independent public-information project, not the official City of Round Rock website. Stable reference: corpuslaw.us/code/f6f04644-657f-4ed2-bac9-a9cd96754a93
Sec. 2-45. - LI (Light Industrial) district.
(a) Purpose. To establish and preserve areas of high intensity land use primarily devoted to light manufacturing, assembly and other nonpolluting industries. (b) Permitted uses. Uses permitted in the LI district may be found in Sec. 2-48. (c) Lot and building dimensional standards. Property and buildings in the LI district shall conform to the standards found in Sec. 2-49. (d) Supplementary development standards. In addition to the standards found in chapter 8 of this Code, the following regulations apply to the LI district: (1) Light fixture height. The height of a light fixture shall not exceed 30 feet, however if a light fixture is within 25 feet of a residential lot line, it shall not exceed 20 feet in height. Developments in existence prior to the adoption of this code which have light fixtures exceeding 25 feet may maintain the existing fixture height. (e) Light industrial design standards. The following design standards apply to all buildings in the LI district. These standards are intended to ensure an attractive built environment in Round Rock. Alternative designs may be approved by the zoning administrator to implement a specific, recognized architectural style not accommodated by the design standards below, excluding corporate architecture. Additions to sites and projects with existing buildings may continue the design style that has been previously established. (1) Exterior wall finish. The exterior finish of all buildings shall be constructed of brick, natural stone, simulated stone, stucco, concrete masonry units (CMU) having a split-face, stone-face, or burnished finish, concrete tilt wall, architectural steel or metal, other steel or metal, or similar material approved in writing by the zoning administrator, except for doors, windows, and trim. a. Architectural steel or metal shall not exceed 33% of the total exterior wall finish. b. Other steel or metal, such as unfinished corrugated aluminum and similar products, shall be prohibited on elevations that face public streets, access drives, or lots zoned for residential uses. c. Quonset style buildings and structures are prohibited.
Ask a question about Round Rock law
Corpus searches the Round Rock sections it holds and shows the ones that match, with their citations. Free, no sign-in.
