For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 2-97 — Wireless transmission facilities (WTFs)

Code of Ordinances, City of Round Rock, Texas (Supp. 27: codified through Ordinance of August 13, 2026 (online updated November 5, 2026)) · Round Rock Zoning and Development Code, art. VIII, § 2-97

Corpus is an independent public-information project, not the official City of Round Rock website. Stable reference: corpuslaw.us/code/fcc39acb-b043-42d1-ab17-23b96553a3dc

Sec. 2-97. - Wireless transmission facilities (WTFs).

(a) General standards. All wireless transmission facilities (WTFs) shall comply with the following standards: (1) Location prioritization. The city shall prioritize proposed locations for new WTFs in the following order: a. Attached to an existing WTF. b. Attached to a utility infrastructure, as defined in chapter 44, article X of the Code of Ordinances. c. Attached as a stealth WTF to an existing building or structure in a nonresidential zoning district. d. Attached to an existing building or structure in a nonresidential zoning district. e. Located as a freestanding stealth WTF in a permitted nonresidential zoning district. f. Located as a self-enclosed monopole in a permitted nonresidential zoning district. g. Located as a monopole in a permitted nonresidential zoning district. h. Attached as a stealth WTF to an existing nonresidential building or structure in a residential zoning district. i. Attached to an existing nonresidential building or structure in a residential zoning district. j. Located as a freestanding stealth WTF on a lot of a nonresidential use within a residential zoning district. k. Located as a self-enclosed monopole on a lot of a nonresidential use within a residential zoning district. (2) Historic regulations. Any application to locate a WTF in an historic district or on a building or structure that is listed on an historic register shall be subject to review and approval by the historic preservation commission in accordance with Sec. 10-56. (3) Combination with other uses. Except as provided in subsection (5) of this section, a WTF is permitted on a lot with an existing use. (4) Combination with nonconforming buildings, uses and land. A WTF is permitted on a nonconforming building, on a lot with an existing nonconforming use, or in combination with a nonconforming use of land, provided that the WTF shall cease to operate if and when the provisions in Sec. 2-98 require that the nonconforming building, structure, use or use of land be removed, if the nonconforming use is not able to be brought into compliance with the required provisions of this Code. (5) Prohibited combination. A WTF is prohibited on billboard signs. (6) Signage. Advertising is prohibited anywhere on a WTF, except for the minimum signage as required by the Federal Communications Commission (FCC) regulations or necessary for the operation of a WTF. (7) Identification sign. An identification sign for each service provider responsible for the operation and maintenance of a WTF at the site, not larger than two square feet, shall be posted at a location from which it can be easily read from outside the perimeter of the WTF, and shall provide the name, address, and emergency telephone number of the responsible service provider. (8) Noise. Equipment located at the base of a WTF shall not generate noise in excess of 75 db at the property line. (9) Automation. Except as provided in subsection (10) of this section and during construction or an emergency, a WTF shall be fully automated and unattended on a daily basis, and shall be visited only for periodic and necessary maintenance. (10) Maintenance and repair. All WTFs and associated equipment shall at all times be kept and maintained in good condition, order, and repair so that the same shall not menace or endanger the life or property of any person. Routine testing and maintenance shall be limited to weekdays between 8:30 a.m. and 4:30 p.m. Emergency repairs shall be allowed at all times. (11) Removal. Any WTF that is not operated for a continuous period of six months shall be considered abandoned, and shall be removed within 60 days of receipt of notice from the city of such abandonment. Each property owner and person in control of the site is responsible for removal, jointly and severally. If such facility is not removed within said 60 days, the city may remove such facility at their expense. If there are two or more users of a single WTF, then this provision shall not become effective until all users cease operations on the facility housing the users. (12) Improvement and replacement. An existing WTF may be improved or replaced with a new WTF provided the improvements or replacement comply with the provisions of this article. (13) Violations. In addition to any other relief provided by this article, the city may apply to a court of competent jurisdiction for an injunction to prohibit the continuation of any violation of this article and other available relief. (b) Monopoles and self-enclosed monopoles. (1) Permitted locations. a. Monopoles may only be located in LI and I zoning districts, subject to the conditions set forth in this article. b. Self-enclosed monopoles may be located in SF-R, SF-1, SF-2, SF-3, SF-D, C-1, BP, LI, I, PF-3 and OS zoning districts, subject to the following conditions and the conditions set forth in this article: 1. Self-enclosed monopoles in SF-R, SF-1, SF-2, SF-3, SF-D, C-1, BP, PF-3 and OS districts shall be located at a minimum of 200 feet from a residential property line and 100 feet from the centerline of a public right-of-way. 2. Self-enclosed monopoles shall only be permitted in C-1, BP and PF-3 zoning districts on lots that are ten acres or more; or on a lot adjacent to other lots that are zoned C-1, BP and PF-3, which when combined provide the cumulative sum of ten acres or more. 3. Only one self-enclosed monopole is permitted for every ten acres of contiguous development in C-1, BP and PF-3 districts. Multiple self-enclosed monopoles may be clustered together. 4. Self-enclosed monopoles in BP, PF-3 and C-1 districts are permitted only in the service area at the rear or side of a building. 5. Self-enclosed monopoles in BP, PF-3 and C-1 districts may not be located in a street yard or in a side or rear yard that abuts a residential use. 6. Self-enclosed monopoles shall only be permitted in OS zoning districts on lots that are ten acres or more; or on a lot adjacent to other lots zoned OS, which when combined provide the cumulative sum of ten acres or more. 7. Self-enclosed monopoles in OS districts must be approved by the director of the parks and recreation department. 8. Self-enclosed monopoles shall only be permitted in SF-R, SF-1, SF-2, SF-3, and SF-D districts on lots used for the following nonresidential purposes: places of worship, schools or fire stations. 9. Self-enclosed monopoles shall only be permitted in SF-R, SF-1, SF-2, SF-3, and SF-D districts as a special exception in accordance with Sec. 10-53. (2) Setbacks. The standard setbacks for each zoning district shall apply to monopoles and any associated equipment, with additional setbacks or separation being required in the sections below. (3) Maximum height. a. LI and I zoning districts. The maximum height of a monopole in LI and I zoning districts shall be no more than 150 feet (including antenna). b. SF-R, SF-1, SF-2, SF-3, SF-D, C-1, BP, PF-3 and OS zoning districts. The maximum height of a self-enclosed monopole in SF-R, SF-1, SF-2, SF-3, SF-D, C-1, BP, PF-3 and OS zoning districts shall be no more than 80 feet (including antenna). c. The maximum height of associated equipment located at the base of a monopole or self-enclosed monopole shall be no more than ten feet. (4) Color. Monopoles and self-enclosed monopoles shall be painted a non-contrasting gray, beige or similar neutral color minimizing its visibility, unless otherwise required by the FCC or Federal Aviation Administration (FAA). (5) Lighting. No monopole or self-enclosed monopole shall be artificially lighted except as required by the FCC and FAA. Security lighting around the equipment shelter is permitted provided it is not visible from neighboring properties. Lighting for maintenance purposes is permitted, provided the lights are not used at any other time. (6) Screening. The equipment shelter at the base of a monopole or self-enclosed monopole shall be screened from public view by an unpainted split-face decorative masonry wall with a minimum height of one foot greater than the height of the equipment shelter. (7) Hazardous waste. No hazardous waste shall be discharged on the site of any monopole or self-enclosed monopole. If any hazardous materials are to be used on-site, there shall be provisions for full containment of such materials. An enclosed containment area shall be provided with a sealed floor, designed to contain at least 100 percent of the volume of the hazardous materials stored or used on the site. (8) Collocation requirements. New monopoles and self-enclosed monopoles shall be designed to accommodate at a minimum three WTFs, including the antennae and any associated ground-mounted equipment, unless the applicant demonstrates that such a design is not feasible for economic, technical or physical reasons. Service providers shall allow the collocation of attached WTFs by competing service providers. (9) Application requirements for site plan review and building permit. The following steps must be taken for the application of a new monopole or self-enclosed monopole to be considered for review: a. Applications and all associated plans and documentation shall be submitted to the planning and development services department. b. The applicant shall provide an inventory of all existing WTFs used by the applicant within the city limits or its ETJ, including but not limited to the location, height and design of each existing WTF. c. The applicant shall demonstrate in writing that the WTF must be located where it is proposed in order to service the applicant's service area and shall address the location prioritization criteria listed in subsection (a)(1) above. d. The applicant shall provide evidence of written contact with all wireless service providers which supply service within a quarter mile of the proposed facility. The applicant shall inquire about potential collocation opportunities at all technically feasible locations. The contacted providers shall be requested to respond in writing to the inquiry within 30 days. The applicant's letter, as well as responses, shall be included in the application as a means of demonstrating the need for a new monopole or self-enclosed monopole. e. If the WTF is to be located on a lot with another principal use, the applicant shall present documentation that the owner of the property has granted an easement or entered into a lease for the proposed facility and that vehicular access is provided to the facility. f. The applicant shall provide a site plan for the proposed WTF in accordance with the requirements of Sec. 10-45, as applicable. g. The applicant shall provide detailed construction plans showing the design and installation of the WTF. These plans shall be sealed by a professional engineer and/or licensed architect, as applicable, and shall be in compliance with the National Electrical Code. h. After the WTF has been constructed, the project engineer shall provide a letter certifying that the WTF was constructed in accordance with the approved plans. (c) Attached WTF. (1) Permitted locations. a. An attached WTF may be placed on a monopole, building or structure in the SR, MF-2, MF-3, C-1, C-2, OF-1, OF-2, BP, LI, I, MI, PF-1, PF-2, PF-3, MU-R, MU-G and OS zoning districts, subject to the conditions of this article. b. An attached WTF may be attached to the following nonresidential buildings and structures that are permitted or accessory uses in SF-R, SF-1, SF-2, SF-3, SF-D, TF, TH, MH, MF-1 and SR residential zoning districts: Schools, places of worship, municipal or governmental buildings or facilities or buildings or structures owned by a utility, subject to the conditions of this article. (2) Mounting and setbacks. The support structure or equipment for an attached WTF shall be mounted flush with the vertical exterior of the building or structure to which it is attached or shall project no more than 24 inches from the surface of the building or structure to which it is attached, and shall not violate the building setback requirements of the zoning district in which the building or structure is located. (3) Maximum height. a. An attached WTF shall not extend more than ten feet above the building or structure to which it is attached and shall not violate the maximum height restriction of the zoning district in which the building or structure is located. The foregoing restriction shall not apply to WTFs attached to state, county and municipal structures. b. An existing WTF may be extended in order to accommodate an attached WTF. Under no circumstances shall the height of the WTF exceed 150 feet (including antenna) in LI and I zoning districts and 80 feet (including antenna) in SF-R, SF-1, SF-2, SF-3, SF-D, C-1, BP, PF-3 and OS zoning districts. (4) Visibility. a. Equipment associated with roof-mounted WTFs shall be screened from public view. Screening shall utilize the same or similar materials as the principal structure. If roof decks with mechanical equipment are visible from any level of adjacent buildings, the mechanical equipment must be painted to match the finished roof material. b. Attached WTFs that are side-mounted shall blend with the existing building's architecture and shall be painted or shielded with material that is consistent with the design features and materials of the building. c. All cabinets, boxes and WTF associated equipment that is not roof-mounted or side-mounted shall be located underground, unless it is so designed and located that it is not visible from a street. (5) Application requirements for site plan review and building permit. The following steps must be taken for the application of a new attached WTF to be considered for review: a. Applications and all associated plans and documentation shall be submitted to the planning and development services department. b. The applicant shall provide an inventory of all existing WTFs used by the applicant within the city limits or its ETJ, including but not limited to the location, height and design of each existing WTF. c. The applicant shall demonstrate in writing that the attached WTF must be located where it is proposed in order to service the applicant's service area and shall address the location prioritization criteria listed in subsection (a)(1) above. If the applicant is applying for a permit in a residential district, the applicant must present substantial evidence as to why it is not technically feasible to locate in a more appropriate nonresidential zoning district. d. If the applicant is proposing to attach the WTF to any building or structure other than an existing WTF, the applicant shall provide evidence of written contact with all wireless service providers who supply service within a quarter mile of the proposed facility. The applicant shall inquire about potential collocation opportunities at all technically feasible locations. The contacted providers shall be requested to respond in writing to the inquiry within 30 days. The applicant's letter, as well as responses, shall be included in the application as a means of explaining why the proposed attached WTF cannot be located on an existing WTF. e. The applicant shall present documentation that the owner of the building or structure to which the WTF will be attached has granted permission for the proposed facility to be attached and maintained. f. If the attached WTF includes associated equipment that is ground-mounted, the applicant shall provide a site plan for the proposed WTF in accordance with the requirements of Sec. 10-45, as applicable. g. If the applicant is proposing to install a roof-mounted WTF, the planning and development services department shall be provided with an engineer's certification that the roof will support the proposed WTF and associated roof-mounted equipment. h. The applicant shall provide detailed construction plans showing the design and installation of the WTF. These plans shall be sealed by a professional engineer and/or licensed architect, as applicable, and shall be in compliance with the National Electrical Code. i. After the WTF has been constructed, the project engineer or architect shall provide a letter certifying that the WTF was constructed in accordance with the approved plans. (d) Stealth WTF. (1) Permitted locations. a. A stealth WTF may be located in the SR, MF-2, MF-3, C-1, C-2, OF-1, OF-2, BP, LI, I, MI, PF-1, PF-2, PF-3, OS, MU-1, MU-2, MU-R, and MU-G zoning districts, subject to the conditions of this article. b. A stealth WTF may be attached to a nonresidential building or structure that is a permitted or accessory use in SF-R, SF-1, SF-2, SF-3, SF-D, TF, TH, MH, MF-1, SR, and MU-L zoning districts, including but not limited to, a homeowners' association amenity center, a school, a church, a municipal or governmental building or facility, an agricultural building or a building or structure owned by a utility, subject to the conditions of this article. (2) Setbacks. The standard setbacks for each zoning district shall apply to all stealth WTFs. To protect citizens in their homes, freestanding stealth WTFs shall be placed a minimum distance equal to the height of the freestanding stealth WTF away from any residential structure. No guy wires may be used. (3) Maximum height. The maximum height of a stealth WTF shall be determined by the height limitations stated in Chapter 2 for the type of structure the WTF resembles. (4) Visibility. The antenna and associated equipment of a stealth WTF shall be screened, disguised, concealed or otherwise camouflaged as part of a structure such that the antenna and associated equipment of the WTF are indistinguishable from the structure that it is attached to or within. If the zoning administrator determines that the associated equipment cannot be feasibly or adequately camouflaged due to the unique circumstances of the proposed location, it shall be placed underground; or it may be screened from view from the public right-of-way and adjacent properties by an unpainted decorative masonry wall with a minimum height of one foot greater than the height of the equipment shelter. In zoning districts other than LI, I, and PF-3, the required masonry wall shall be screened by planting one five-gallon or larger size shrub for every three linear feet around the boundary of the wall. Shrubs shall be a minimum height of 2.5 feet at installation. (5) Application requirements for site plan review and building permit. The following steps must be taken for the application of a new freestanding or attached stealth WTF to be considered for review: a. Applications and all associated plans and documentation shall be submitted to the planning and community development department. b. The applicant shall provide an inventory of all existing WTFs used by the applicant within the city limits or its ETJ, including but not limited to the location, height and design of each existing WTF. c. The applicant shall demonstrate in writing that the stealth WTF must be located where it is proposed in order to service the applicant's service area and shall address the location prioritization criteria listed in subsection (a)(1) above. If the applicant is applying for a permit in a residential district, the applicant must present substantial evidence as to why it is not technically feasible to locate in a more appropriate nonresidential zoning district. d. The applicant shall provide evidence of written contact with all wireless service providers who supply service within a quarter mile of the proposed facility. The applicant shall inquire about potential collocation opportunities at all technically feasible locations. The contacted providers shall be requested to respond in writing to the inquiry within 30 days. The applicant's letter, as well as responses, shall be included in the application as a means of explaining why the proposed stealth WTF cannot be located on an existing WTF and as a means of demonstrating the need for a new stealth WTF. e. If a stealth WTF is to be located on a lot with another principal use, the applicant shall present documentation that the owner of the property has granted an easement or entered into a lease for the proposed facility and that vehicular access is provided to the facility. f. The applicant shall provide an artist's rendering of the proposed stealth WTF, along with images of comparable structures, both of similar stealth WTFs and of the actual structures that the WTF will be mimicking. g. The applicant shall provide detailed construction plans showing the design and installation of the WTF. These plans shall be sealed by a professional engineer and/or licensed architect, as applicable, and shall be in compliance with the National Electrical Code. h. Applications for attached stealth WTFs with ground-mounted associated equipment and applications for freestanding stealth WTFs shall also include a site plan for the proposed WTF in accordance with the requirements of Sec. 10-45, as applicable. i. After the stealth WTF has been constructed, the project engineer or architect shall provide a letter certifying that the stealth WTF was constructed in accordance with the approved plans. (6) Criteria for approval. The zoning administrator shall determine whether a proposed stealth WTF is sufficiently camouflaged based on the type, size, scale and appropriateness of the structure that the stealth WTF will resemble in relation to the architectural and land use context in which the stealth WTF is located.

Ask a question about Round Rock law

Corpus searches the Round Rock sections it holds and shows the ones that match, with their citations. Free, no sign-in.