121.9

SEC. 121.9. SUBDIVISION OF LARGE LOTS, PDR DISTRICTS. In order to promote, protect, and maintain viable space for a wide range of light industrial uses in PDR Districts, in furtherance of Objective 4 of the Commerce and Industry Element and Policies 1.5 and 8.1 of the Bayview Hunters Point Area Plan, any proposal to subdivide, resubdivide, or perform a lot line adjustment to a parcel that is equal to or greater than 10,000 square feet, into one or more smaller parcels, shall be permitted only with Conditional Use authorization. Additionally, all proposals for the subdivision, resubdivision, or lot line adjustments of parcels in PDR Districts shall be evaluated in consideration of the following criteria in order to further Objective 4 of the Commerce and Industry Element and Policies 1.5 and 8.1 of the Bayview Hunters Point Area Plan: (a) The proposed parcelization will support light industrial activities in the district. (b) If the resulting parcelization will require demolition of a structure, the demolition of the structure complies with the Industrial Uses replacement requirement per Section 202.7. (c) The uses proposed for the parcels, if any, comply with the cumulative use size limits detailed in the PDR Zoning Control Table. (Added as Sec. 121.7 by Ord. 99-08, File No. 080339, App. 6/11/2008; redesignated and amended by Ord. 298-08, File No. 081153, App. 12/19/2008; amended by Ord. 22-15, File No. 141253, App. 2/20/2015, Eff. 3/22/2015; Ord. 202-18, File No. 180557, App. 8/10/2018, Eff. 9/10/2018) AMENDMENT HISTORY Former divisions (1)-(3) redesignated as (a)-(c); current division (c) amended; Ord. 22-15, Eff. 3/22/2015. Undesignated introductory paragraph and division (b) amended; Ord. 202-18, Eff. 9/10/2018. SEC. 122. HEIGHT AND BULK LIMITATIONS. Buildings and structures shall be subject to the height and bulk limits established by Article 2.5 of this Code for use districts and for height and bulk districts. (Amended by Ord. 443-78, App. 10/6/78) SEC. 123. MAXIMUM FLOOR AREA RATIO. (a) The limits upon the floor area ratio of buildings, as defined by this Code, shall be as stated in this Section and Sections 124 through 128.1. The maximum floor area ratio for any building or development shall be equal to the sum of the basic floor area ratio for the district, as set forth in Section 124, plus any premiums and floor area transfers which are applicable to such building or development under Sections 125, 127, 128 and 128.1 and as restricted by the provisions of Sections 123(c) and (d) and 124(b) and (j). (b) No building or structure or part thereof shall be permitted to exceed, except as stated in Sections 172 and 188 of this Code, the floor area ratio limits herein set forth for the district in which it is located. (c) In the C-3 Districts, the amount of TDR that may be transferred to a development lot, as allowed by Section 128, is limited as follows: (1) The gross