§ 6-12 — Connectivity
Code of Ordinances, City of Round Rock, Texas (Supp. 27: codified through Ordinance of August 13, 2026 (online updated November 5, 2026)) · Round Rock Zoning and Development Code, art. II, § 6-12
Corpus is an independent public-information project, not the official City of Round Rock website. Stable reference URL
Sec. 6-12 - Connectivity.
(a) With the submittal of a preliminary plat for a new single-family or two-family subdivision, a connectivity index shall be included and calculated for the road network in the subdivision. The roadway connectivity index shall be a minimum of 1.35, however additional pedestrian links shall be provided to increase the overall connectivity index to a minimum of 1.40. Subdivisions with a roadway connectivity index of 1.40 or greater shall not be required to provide additional pedestrian links. (b) The connectivity index shall be calculated by dividing the total number of links by the total number of nodes in the proposed subdivision. (1) Arterial streets shall not be included in the calculation of the connectivity index except when it is necessary to travel along an arterial street to reach any two points in the subdivision. (2) Stub streets that will eventually connect the subdivision to a future subdivision or arterial or collector street shall not be counted as a node. The segment of the stub street shall count as a link. (3) Alleys shall not be counted as a link, and locations where an alley intersects with a street shall not be counted as a node. (4) Any location where a street name changes (as approved by the zoning administrator) shall be considered a node. (5) Any location where a street T-intersects with another street of any classification shall be considered a node. (6) Any curve or bend of a street that exceeds 75 degrees shall receive credit as a node. (7) Any curve or bend of a street that does not exceed 75 degrees shall not be considered a node. (8) Links on existing adjacent local streets that are not part of the proposed subdivision shall not be included in the connectivity index calculation if those streets are proposed as the only street connections that will be active at the time of the proposed subdivision's approval. (c) Subdivisions shall have a minimum number of connections to public roads and a minimum number of stub streets where necessary to connect to future subdivisions on adjacent tracts of land as follows: (1) Less than 75 lots: one (1) connection to a public road and one (1) stub street; (2) For 75 lots up to 150 lots: two (2) connections to a public road and one (1) stub street; (3) For 151 lots up to 300 lots: three (3) connections to a public road and two (2) stub streets; (4) For 301 lots up to 400 lots: four (4) connections to a public road and three (3) stub streets; (5) For 401 lots up to 500 lots: five (5) connections to a public road and four (4) stub streets; (6) For 501 lots up to 800 lots: six (6) connections to a public road and five (5) stub streets; (7) For 801 lots and more: one (1) additional connection to a public road and one (1) additional stub street for each additional 200 lots; (8) One (1) additional stub street may substitute for one (1) public road connection requirement. (d) A subdivision may have a roadway connectivity index of less than 1.35, provide fewer connections to public roads, or provide fewer stub streets than required by the above where specific features or constraints of the land being subdivided make strict compliance impossible or impractical. Such features include the following: (1) Natural features such as bodies of water, severe elevation changes, karst features, or monarch trees; (2) Important cultural or archeological features such as historic landmarks or burial grounds; (3) Incompatible land uses adjacent to the proposed subdivision; (4) Adjacent subdivisions which do not provide stub streets or other opportunities to connect to the proposed subdivision; and (5) Situations where intersection and driveway separation requirements prevent the ability to provide additional connections to a public road. The applicant shall attach to the plat application an explanation of how the connectivity of the proposed subdivision is hindered by the presence of any noted features. Under no circumstance shall the desire for an increased lot yield or financial constrains serve as a justification for a reduced connectivity index. The PDS director shall approve the application if it determines the connectivity of the proposed subdivision cannot meet the requirements of this section due to the site constraints. Alternately, the PDS director may deny the application if it determines the proposed subdivision's connectivity can be reasonably improved in spite of the presence of said features.
(Ord. No. O-2024-168, § IX, 6-27-2024)
