§ 6-14 — Intersections
Code of Ordinances, City of Round Rock, Texas (Supp. 27: codified through Ordinance of August 13, 2026 (online updated November 5, 2026)) · Round Rock Zoning and Development Code, art. II, § 6-14
Corpus is an independent public-information project, not the official City of Round Rock website. Stable reference URL
Sec. 6-14. - Intersections.
(a) Proposed intersections shall be designed to meet the minimum spacing requirements, curb radii, and corner sight distances required in the Design and Construction Standards, and based on the following design specifications: (1) Streets shall intersect at right angles. In the event of physical constraints that prevent right angles, a modification of up to 20 degrees may be permitted by the planning and zoning commission upon recommendation by the public works director. (2) The right-of-way line at street intersections shall be in accordance with the Design and Construction Standards. (3) The centerline of intersecting streets shall be a minimum of 200 feet from other street intersections. This offset shall not apply to streets intersecting a street if a raised median is provided and no median opening is aligned with either of the offset streets. Future median openings are prohibited where two streets offset and intersect an arterial street at a distance of less than 200 feet; provided, however, median openings may be allowed for one-way traffic circulation subject to the approval of the public works director.
(Ord. No. O-2024-168, § X, 6-27-2024; Ord. No. O-2024-266, § XXXV, 9-26-2024)
