For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 8-149 — Permits

Code of Ordinances, City of Round Rock, Texas (Supp. 27: codified through Ordinance of August 13, 2026 (online updated November 5, 2026)) · Round Rock Zoning and Development Code, art. X, § 8-149

Corpus is an independent public-information project, not the official City of Round Rock website. Stable reference URL

Sec. 8-149. - Permits.

(a) Generally. Except as otherwise provided in this Code, it shall be unlawful for any person to install, cause to be installed, or permit the installation of, or make any alterations, additions, changes or repairs to any electrical wiring fixtures or equipment within or on any building, structure, or premises, whether publicly or privately owned, without first obtaining a valid permit therefor. (b) Permit not required. No permit shall be required for: (1) The installation of electrical conductors or equipment within and on the premises which are under the control and supervision of the state highway department and where such installation will be operated, maintained or controlled or supervised by said state highway department. (2) The installation of electrical conductors or equipment by or for a public utility corporation in the generation, transmission, sale or use of electrical energy as outlined in its franchise. (3) The installation of low voltage HVAC control wiring in residential only. (4) The replacement of: a. A motor by another motor of the same horsepower and rating; b. Solenoid valves; c. Low pressure controls; when the electrical supply to the same is or has been properly installed by a licensed electrician. (c) Permit application. (1) Application for permits shall be made in writing upon forms provided by the chief electrical inspector. The application shall contain the following information: a. The date the application is submitted; b. The applicant's name; c. The exact address where electrical work is to be done; d. A description of the electrical work to be done; e. Other pertinent information as required by the chief electrical inspector. If a diagram or plan is required, it shall clearly show the following: 1. The character and kind of wiring or installation of fixtures or equipment work to be done; 2. The scale used and the manner in which the electrical installation is to be made; 3. The character of any repairs to any existing installation showing the point at which service connection is required; 4. The size of feeders and subfeeders; 5. The location of service switches and centers of distribution; 6. The arrangement of circuits and the number of outlets connected thereto; 7. Load calculations; 8. A profile view of the service entrance equipment including all gutter troughs, junction boxes, switches, disconnects, fuses, panel boards, current transformer enclosures and meter sockets, detailing how this equipment is to be arranged on the wall of the building; 9. The maximum available fault current at the service entrance shall be obtained from the local utility company; and 10. Fault current bracing information. (2) Applications for permits shall only be issued to the following persons: a. A master electrician licensed under this Code; b. A property owner who shall certify that the proposed electrical work shall be performed by the applicant personally, in a residence presently occupied by the applicant as his homestead. (d) Permit issuance. (1) Permits shall be issued to licensed master electricians, or their duly authorized agents. (2) The city operates under a "one permit" system on new construction whereby a general contractor or owner may secure a single permit covering all of the building, electrical, plumbing, heating, ventilating, and air conditioning requirements. However, where only electrical work is being performed, a master electrician, as defined herein, must secure a permit covering the work to be done. There shall not be more than one permit issued or outstanding at the same time for any one installation of electrical equipment, except for renewal, additions or finish-out or when requested by the city building official. (3) The chief building inspector may require an inspection prior to the issuance of a permit. (4) A permit issued under this division shall continue until revoked or for the period of time designated on the permit. (e) Revocation and suspension of permits. (1) The chief electrical inspector has the authority to revoke or suspend a permit or approval issued if any violation of this division is found upon inspection or in the case there have been any false statements or representations submitted in the application or plans on which the permit or approval was based. (2) Revocation will be deemed to occur on the date that the permittee is duly notified of the violation. (f) Reissued permit. A permit may be reissued changing the electrician of record upon written application by the person to whom the original permit was issued. However, before the permit is issued, the chief building inspector shall mail a written notice to the electrician of record with a copy to the owner, notifying them of the application for a reissued permit. The notice to the electrician of record shall be by certified mail, return receipt requested, and shall not be reissued until the expiration of ten days after the notice was mailed. The application for a reissued permit shall be accompanied by a permit reissuance fee as currently established or as hereafter adopted by resolution of the city council from time to time. The applicant shall be responsible for all electrical work on the project site, including all work performed prior to reissuance. (g) Duplicate. In the event that a permit is lost or destroyed, the permit holder may obtain a duplicate thereof: (1) By furnishing satisfactory proof to the chief electrical inspector that the permit was lost or destroyed; and (2) Upon payment of a fee as currently established or as hereafter adopted by resolution of the city council from time to time. (h) Certain acts prohibited. (1) Any attempt to defraud or otherwise deliberately or knowingly design, install, service, maintain, operate, sell, represent, represent for sale, falsify records, reports, or applications, or other related activity in violation of this division. (2) Any violation of this division will provide cause for immediate suspension or revocation of any related licenses, certificates, or permits issued by this jurisdiction. All violations are additionally subject to any other civil or criminal penalties that may apply.

(Ord. No. O-2017-4343, § I, 4-27-2017; Ord. No. O-2018-5866, § IX, 9-27-2018)