HEAVY INDUSTRIAL DISTRICT (I-2)
Ridgeland Zoning Ordinance § 510
in effectHEAVY INDUSTRIAL DISTRICT (I-2)
HEAVY INDUSTRIAL DISTRICT (I-2)
SECTION
510
510.01 PURPOSE OF THIS DISTRICT: The purpose of this district is to provide areas
for the exclusive development of industrial uses that generally have extensive space
requirements and/or generate substantial amounts of noise, vibration, odors, or
possess other objectionable characteristics. It is the intent of this Ordinance that
such "heavy" industrial districts be located insofar as possible adjacent only to C-4
Highway Commercial districts, C-5 High Intensity Commercial districts, or I-1
Limited Industrial districts, which shall serve as transitional zones between I-2
districts and residential uses and lower intensity commercial uses. Heavy industrial
uses shall be located only in areas directly accessible to major thoroughfares or
railroads. (See also Section 36 of this Ordinance with regard to prohibited uses.) The
land uses permitted in I-2 districts may include those located OUTDOORS as well
as those within enclosed structures, subject to the regulations of this Ordinance and
standards established by appropriate Federal and State regulatory agencies.
510.02 LAND USES PERMITTED:
A. Any use permitted in an I-1 district, subject to I-1 regulations.
B. Heavy manufacturing uses WHICH ARE NOT POTENTIALLY
HAZARDOUS OR OFFENSIVE TO NEIGHBORING LAND USES due
to the emission of dust, gas, smoke, noise, fumes, odors, vibrations, or other
objectionable influences shall be permitted by right in I-2 districts, EXCEPT
THAT MANUFACTURING USES OF THE "WET" TYPE (i.e., those
industries which require large amounts of water in processing or discharge
large amounts of by-products through the sewer system) SHALL BE
PERMITTED ONLY AS CONDITIONAL USES (see Section 510.03).
C. Concrete manufacturing plants.
D. Sawmills.
E. Wholesale landscape nursery and greenhouse operations.
F. Sod Farm.
G. Accessory structures and uses customary and incidental to any of the
foregoing permitted uses and not otherwise prohibited.
H. Public streets, highways, private streets, and alleys.
510.03 CONDITIONAL USES AND STRUCTURES AS PROVIDED IN
SECTION 600.09:
A. Public or quasi-public facilities and utilities in compliance with Section 32
and other regulations of this Ordinance.
B. Any conditional use listed under I-1 district regulations, subject to I-1
regulations.
C. Primary metal manufacturing, including: blast furnaces, steel works, and the
rolling and finishing of ferrous metals; iron and steel foundries; primary
smelting and refining of non-ferrous metals; and similar activities.
D. Any manufacturing activity requiring large amounts of water for processing
or discharging large amounts of waste or by-products into the sewer system.
E. Mining, quarrying (including sand and gravel pits operations), and crude
petroleum and natural gas production. In the case of open pit mining or
quarrying, a Reclamation Plan shall be submitted to and approved by the
Mayor and Board of Aldermen prior to the initiation of such uses.
F. Junk yards subject to Special Use Site Plan Standards in Section 600.14.F.
G. Any other use of a heavy industrial nature which is not prohibited under
Section 36.05 of this Ordinance or otherwise prohibited by law may be
initiated in I-2 districts, subject to any limitations and restrictions deemed
necessary by the Mayor and Board of Aldermen.
H. Existing Landfill subject to Special Use Site Plan Standards in Section
600.14.F.
I. New Landfill or Expansion or Reconfiguration of an Existing Landfill
subject to Special Use Site Plan Standards in Section 600.14.F.
510.04 DIMENSIONAL REQUIREMENTS:
A. Maximum Building Height: Subject to Site Plan Review.
B. Minimum Lot Area: One (1) acre.
C. Minimum Lot Width: 100 feet.
D. Lot Coverage, Maximum: 60%
E. Minimum Yards:
1. Front yard: 60 feet from the right-of-way line of an existing or
proposed street in accordance with the adopted Thoroughfares
Plan.
2. Side yards and rear yards: 25 feet. When a proposed I-2 use would
adjoin any other zoning district other than I-1 or I-2, a 75-foot
building setback and landscaped open space shall be required. A 50-
foot wide buffer of this 75 foot setback shall be planted with trees or
naturally forested space if preserved. No other use shall occur in this
setback.
F. Minimum Space between Buildings: No building within the I-2 district
shall be nearer than 20 feet to any other building.
G. Outside Storage/Refuse Areas: All storage areas and refuse collection
areas shall be located in the rear or side yard and shall be totally encircled and
screened by a fence, planting, or other suitable visual barrier in order to
eliminate view from public streets.
510.05 REQUIRED LANDSCAPING FOR AREAS NOT USED FOR BUILDINGS
OR OTHER STRUCTURES, PARKING, REQUIRED YARDS OR
DRIVEWAYS: The first five feet adjacent to the boundary line on rear and side
yards and the first ten feet adjacent to the street on the front setback shall be
landscaped. This area shall not be used for parking spaces; however, driveways for
connectivity to adjacent properties shall be permitted. Developers shall provide
landscaping for all portions of a lot not used for buildings or other structures,
parking, required yards or driveways. The location and type of landscaping to be
installed shall be noted on the site plan. Maintenance of this required landscaping
shall be the responsibility of the property owner and failure to maintain the
landscaping in a satisfactory manner shall constitute a violation of this Ordinance
and be subject to the penalties prescribed herein.
510.06 REQUIREMENTS REGARDING EXISTING NARROW STREETS, AND
PROPOSED NEW STREETS: See Subdivision and Development Review
Ordinances of the City of Ridgeland.
510.07 REQUIRED FOR OFF-STREET PARKING, LOADING AND ACCESS
CONTROL: See Section 37 for off-street parking, loading and access control
requirements.
510.08 SIGNS: See Sign Ordinance of the City of Ridgeland, Mississippi.
Source: Official City of Ridgeland published zoning PDFURL: https://www.ridgelandms.org/wp-content/uploads/2026/05/Official-Zoning-Ordinance-Codified-2026_0507-2.pdf#page=161Fetched: 11/14/2026
