LIMITED INDUSTRIAL DISTRICT (I-1)
Ridgeland Zoning Ordinance § 500
in effectLIMITED INDUSTRIAL DISTRICT (I-1)
LIMITED INDUSTRIAL DISTRICT (I-1)
SECTION
500
500.01 PURPOSE OF THIS DISTRICT: The purpose of this district is to provide areas
for the exclusive development of limited manufacturing and industrial uses within
enclosed structures and may include screened outside storage areas for materials. It
is the intent of this Ordinance that I-1 land uses be compatible with abutting
districts, such as commercial districts, which will serve as transitional zones between
the industrial uses and the lower intensity residential uses. The uses permitted in I-1
districts shall generate no objectionable odor, smoke, fumes, vibration, or excessive
noise. Such limited industrial and related uses shall be located only in areas directly
accessible to major thoroughfares or railroads. It is further the intent of this
Ordinance that encroachment by all residential uses be prohibited.
500.02 LAND USES PERMITTED:
A. Office Warehouse.
B. Outside storage of materials subject to screening requirements. Outside
storage must be used in conjunction with an office type use on the same
parcel (i.e. construction company, landscape company, foundation repair
company, utility company)
C. Towing and Wrecker service with vehicle storage and impound yard.
D. Transportation services (i.e. tour bus, limousine service, taxi-cab service)
E. Self-storage facilities and climate controlled storage facilities as defined by
this ordinance.
F. Light or limited manufacturing conducted wholly within completely enclosed
buildings, except that the temporary storage of articles, materials, or other
matter to be processed, assembled, or otherwise changed may be permitted if
adequately screened or buffered. The manufacturing activities conducted in
I-1 districts shall, in general, be dependent upon raw materials refined
elsewhere. The following limited manufacturing uses shall be permitted,
provided they are not offensive to neighboring land uses due to the emission
of dust, gas, smoke, noise, fumes, odors, vibrations, fire hazards, or other
objectionable influences:
1. Processing, canning, packaging and other treatment of food products,
including: bakery products, confectionary and related products, fruit
and vegetable products, fish, poultry and other meat products,
excluding the rendering or refining of fats and oils and the
slaughtering of animals; and other kindred products.
2. Manufacturing, assembly or other treatment of products from the
following secondary materials (previously prepared or refined
materials): plastics, glass, paper, precious or semi-precious metals or
stones, tobacco, and wood (excluding sawmills).
3. Fabrication of metal products including the manufacture of:
machinery (engines and turbines, farm machinery and equipment,
etc.); electrical equipment and supplies; transportation equipment
(including motor vehicles and parts, aircraft and parts, motorcycles,
bicycles and parts, etc.); and other secondary metal manufacturing
such as metal cans, cutlery, hand tools, and general hardware, heating
apparatus and plumbing fixtures, metal stamping, fabricated wire
products, and coating, engraving and allied services.
4. Manufacturing of pottery or similar ceramic products (using only
previously prepared or pulverized clay, and kilns fired only by
electricity or natural gas).
5. Manufacturing of professional, scientific, and controlling
instruments; photographic or optical goods; watches and clocks.
6. Manufacturing of textile mill products, including broad and narrow
woven fabrics and other small wares (cotton, man-made fibers, silk
and wool), floor coverings (rugs and carpets), yarns and similar
products.
7. Manufacturing of apparel and other finished products made from
fabrics, leather, fur and similar materials.
G. Warehousing and storage, provided that all storage is within enclosed
structures; such warehousing may include the storage of goods manufactured
on the premises as well as goods manufactured off the site.
H. Dwellings for resident watchmen and caretakers employed on the premises
of the primary permitted use.
I. Accessory structures and uses customary and incidental to any of the
foregoing permitted uses and not otherwise prohibited.
J. Lawn and Garden equipment sales and service (with outside sales and
display).
K. Public streets, highways, private streets, and alleys.
L. Other similar enterprises which are of the same character and nature as those
specifically permitted above, but not to include those uses first permitted in
the I-2 Heavy Industrial district.
M. Level 1 and Level 2 Electric Vehicle Charging facility as an accessory use to a
principle industrial structure.
N. Data Center including Data Center Related Facilities subject to Special Use
Site Plan Standards in Section 600.14.F.
500.03 CONDITIONAL USES AND STRUCTURES AS PROVIDED IN
SECTION 600.09:
A. Public or quasi-public facilities and utilities in compliance with Section 32
and other regulations of this Ordinance.
B. Conditional uses listed under the C-4 Highway Commercial District
regulations, subject to C-4 Regulations.
C. Television and radio transmitters, telephone microwave towers, and similar
communications facilities (does not include cellular or wireless data towers
which are regulated as public/quasi-public facilities).
500.04 DIMENSIONAL REQUIREMENTS:
A. Maximum Building Height: Subject to Site Plan Review.
B. Minimum Lot Area: 10,000 square feet.
C. Minimum Lot Width: 100 feet.
D. Lot Coverage, Maximum: 60%
E. Minimum Yards:
1. Front yard: 30 feet. No parking will be permitted in the first 15 feet,
as measured from the street right-of-way, but access across this area
with walks, bikeways, trails, and drives will be permitted.
2. Side yards and rear yards: When a proposed I-1 use would adjoin a
C-4 Highway Commercial or a C-5 High Intensity Commercial
District or another industrial district or an existing commercial or
industrial use, side and rear yards of 25 feet shall be required.
When a proposed I-1 use would adjoin any district other than a
commercial or industrial district or an existing commercial or
industrial use, side and rear yards of 50 feet shall be required. This 50
feet shall be landscaped open space.
F. Minimum Space between Buildings: No building shall be nearer than 20
feet to any other building, unless otherwise specified in the current adopted
Building Code of the City of Ridgeland.
G. Outside Storage/Refuse Areas: All storage areas and refuse collection
areas shall be located in the rear or side yard and shall be totally encircled and
screened by a fence, planting, or other suitable visual barrier in order to
minimize view from public streets.
500.05 REQUIRED PLANTING SCREEN FOR USES ABUTTING EXISTING
RESIDENTIAL ESTATE OR SINGLE-FAMILY DETACHED
RESIDENCES: When a proposed use in the I-1 district will abut an existing
single-family detached residence, residential estate zone, or single-family residential
zone, the developer shall install a planting screen having a height of at least six (6)
feet along the side and/or rear property lines of the proposed use. The location and
type of planting screen to be installed shall be noted on the site plan. Maintenance of
this required planting screen shall be the responsibility of the property owner, and
failure to maintain the planting screen shall constitute a violation of this Ordinance
and be subject to the penalties prescribed herein.
500.06 REQUIRED LANDSCAPING FOR AREAS NOT USED FOR BUILDINGS
OR OTHER STRUCTURES, PARKING, REQUIRED YARDS OR
DRIVEWAYS: The first five feet adjacent to the boundary line on rear and side
yards and the first fifteen feet adjacent to the street on the front setback shall be
landscaped. This area shall not be used for parking spaces; however, driveways for
connectivity to adjacent properties shall be permitted. Developers shall provide
landscaping for all portions of a lot not used for buildings or other structures,
parking, required yards or driveways. The location and type of landscaping to be
installed shall be noted on the site plan. Maintenance of this required landscaping
shall be the responsibility of the property owner and failure to maintain the
landscaping in a satisfactory manner shall constitute a violation of this Ordinance
and be subject to the penalties prescribed herein.
500.07 REQUIREMENTS REGARDING EXISTING NARROW STREETS, AND
PROPOSED NEW STREETS: See Subdivision and Development Review
Ordinances of the City of Ridgeland.
500.08 REQUIREMENTS FOR OFF-STREET PARKING, LOADING AND
ACCESS CONTROL: See Section 37 for off-street parking, loading and access
control requirements.
500.09 SIGNS: See Sign Ordinance of the City of Ridgeland, Mississippi.
Source: Official City of Ridgeland published zoning PDFURL: https://www.ridgelandms.org/wp-content/uploads/2026/05/Official-Zoning-Ordinance-Codified-2026_0507-2.pdf#page=157Fetched: 11/14/2026
