NC: Neighborhood Commercial
Reno Annexation and Land Development Code § 18.02.310
in effect18.02.310 - NC: Neighborhood Commercial
(a) Purpose The NC district is intended to promote a mix of pedestrian-oriented commercial, retail, services, and housing options. Additional standards are included to ensure that the site design, uses, and scale are consistent with the adjacent neighborhoods.
[image omitted; see the official code]
Table 2-23 NC: Lot and Building Standards
General Standards
A | Lot Width, minimum | 50 ft
FAR, minimum | —
FAR, maximum | 1.5
Density, minimum | —
Density, maximum | 30 du/acre
Setbacks, minimum
B | Front | 10 ft [1]
C | Side | 0 ft [1] [2]
D | Rear | 0 ft [1] [2]
Street-Facing Garage | 20 ft measured from sidewalk or planned sidewalk to face of garage
Building Separation | 10 ft between principal buildings
Height, maximum
Height | 35 ft
Other
Accessory uses/structures: See Chapter 18.03 Article 4
Site and building standards for Urban Districts: See Chapter 18.04 Article 10
Development standards (parking, landscaping, etc.): See Chapter 18.04
Notes: [1] A minimum zero-foot setback is allowed when the property line abuts an alley and at least 24 feet of backup space (including the alley) is provided from all garage doors and parking spaces that backup onto an alley. [2] If the building is located immediately adjacent to a residentially zoned property, a minimum setback shall be 10 feet.
(Ord. No. 6692, § 1(Exh. A), 1-8-25)
Source: City of Reno, Nevada, Administrative Code, City Charter and Annexation and Land Development Code (Municode Library, library.municode.com)URL: https://library.municode.com/nv/reno/codes/land_development_code?nodeId=CH18.02ZODI_ART3URDI_18.02.310NCNECOFetched: 11/1/2026