Piping system operating pressure.
Batesville Code of Ordinances § 5-2
in effectSec. 5-2. - Piping system operating pressure.
(a) The maximum design operating pressure for piping systems located inside buildings shall not exceed five (5) PSIG unless approved by the authority having jurisdiction and one (1) or more of the following conditions are met:
1. The piping system is welded.
2. The piping is located inside buildings or separate areas of buildings used exclusively for:
a. Industrial processing or heating;
b. Research;
c. Warehousing; or
d. Boiler or mechanical equipment rooms.
3. The piping is a temporary installation for buildings under construction.
(b) The terms used in this section shall be defined as provided in The National Fuel Gas Code, ANI Z223.1, 1980 edition, NFPA 54.
(Ord. No. 84-275, § 1, 27-84)
Source: City of Batesville, Mississippi, Code of Ordinances (Municode Library, library.municode.com)URL: https://library.municode.com/ms/batesville/codes/code_of_ordinances?nodeId=COOR_CH5BUBURE_ARTIINGE_S5-2PISYOPPRFetched: 10/31/2026