§ 42-36. - Permits required.
No permit shall be issued under this article except in the name of the building/property owner through a State licensed, City registered plumbing contractor by whom such plumbing work is to be performed. Permits shall be required for maintenance work or for repair work where plumbing or gas systems are altered, replaced or rearranged. Prior to commencement of any plumbing installation the plumbing contractor shall contact the Development Services Department and obtain a permit. The permit shall be numbered, listing the name of the contractor, job address, building permit number, and scope of the plumbing installation proposed. The permit covers only that work listed thereon. Any additions or changes shall be reported to the Development Services Department and additional inspection fees may be assessed prior to requesting final inspection. Plumbing permits are transferable upon approval by the Development Services Department.
(a) Permits shall be required for all plumbing or gas work, including, but not limited to, the alteration or installation of both new and used equipment and appliances regardless of size or type, which are listed in the International Plumbing Code or International Fuel Gas Code.
(b) A permit shall be required for all gas services or gas piping systems including medical gas and medical-surgical vacuum systems. Where fuel gas pressure in systems exceed the normal utility delivery pressure, the contractor shall indicate piping installation is for an elevated pressure system.
(Ord. No. 25054, § 2, 12-16-14, eff. 3-16-15; Ord. No. 26394, § 4, 3-3-20, eff. 4-3-20, eff. 4-3-20)