Cross-connection control; purpose.
Chandler City Code § 52-34
in effect52-34. - Cross-connection control; purpose.
[The purpose of cross-connection control is:]
A. To protect the public potable water supply of the City of Chandler from the possibility of contamination or pollution by isolating within its customers' internal distribution system(s) or its customers' private water system(s) such contaminants or pollutants which could backflow into the public water supply system;
B. To promote the elimination or control of existing cross-connections, actual or potential, between the customers' in-plant potable water system(s) and nonpotable water systems, plumbing fixtures and industrial piping systems; and
C. To provide for the maintenance of a continuing program of cross-connection control which will systematically and effectively prevent the contamination or pollution of all potable water systems.
52-34.1. Responsibility. The Director of the Public Works and Utilities Department shall be responsible for the protection of the public potable water distribution system from contamination or pollution due to the backflow of contaminants or pollutants through the water service connection.
52-34.2. Requirements. If, in the judgment of the Director of the Public Works and Utilities Department, an approved backflow prevention device is required at the City's water service connection to any customer's premises for the safety of the water system, the Director of the Public Works and Utilities Department or his/her designated agent shall give notice in writing to the customer to install, operate, test, and maintain such an approved backflow prevention device at each service connection to his/her premises. The customer shall immediately install such approved device or devices at his/her own expense; and failure, refusal or inability on the part of the customer to install the device or devices immediately shall constitute a ground for discontinuing water service to the premises until such device or devices have been properly installed and tested for proper working order.
52-34.3. Exceptions. In the case where residential homes incorporate the use of reclaimed wastewater as a water conservation measure, a backflow prevention device shall be installed by the City at the homebuilder's expense at the time of water meter installation. The device shall be installed in City right-of-way at the downstream side of the City water meter. The device shall be tested and maintained by the City. A reduced pressure principle device is the approved backflow prevention device where reclaimed wastewater is available as an auxiliary water supply.
(Ord. No. 2149, § 1.B, 9-13-90; Ord. No. 3060, § 2, 11-18-99; Ord. No. 4802, § 2(Exh., § 35), 4-26-18)
Source: City of Chandler, Arizona, City Code and City Charter (Municode Library, library.municode.com)URL: https://library.municode.com/az/chandler/codes/code_of_ordinances?nodeId=PTVIIIUT_CH52WASE_ARTIVBACRNNCOPR_52-34CRNNCOPUFetched: 11/1/2026
