For AI agents: read the machine-readable documentation index at /llms.txt or the single-file full reference at /llms-full.txt.

§ 244-8 — Roof Signs or Roof Billboards

Milwaukee Code of Ordinances (Volumes 1-3 revised through Common Council action of Sept. 22, 2026) · Milwaukee Code of Ordinances § 244-8

Corpus is an independent public-information project, not the official City of Milwaukee website. Stable reference: corpuslaw.us/code/5ca34c44-bf12-4ca5-9fd3-f51ea4ce58d6

244-8. Roof Signs or Roof Billboards.

1. NEW CONSTRUCTION. The erection of new roof signs and roof billboards and the maintenance of all existing roof signs and roof billboards shall be in compliance with this section and with applicable provisions of ch. 295. All new construction requires drawings certified by a registered engineer. 2. MATERIALS. Roof signs and billboards may have facings constructed of materials as regulated in s. 244-7-1. All structural components shall be of approved noncombustible materials. 3. HEIGHT. The height of roof signs or billboards shall be limited to 50% of the building height limitations as regulated in ch. 295 for the district in which such sign is located and shall include the highest point of the sign structure, and provided further that in no case shall any roof sign exceed a maximum height of 50 feet. 4. LOCATION ON ROOF. a. The facing of roof signs erected parallel to the exterior wall of a building shall be located not less than 5 feet from the exterior wall. No part of such sign or billboard placed at an angle to the exterior wall of a building shall be located less than 2.5 feet from the exterior wall. b. No roof sign or billboard shall be erected on a building of Type No. 7 or 8 construction, unless such building is structurally capable of supporting such additional load with a safety factor of 4. 5. SUPPORTS AND ANCHORAGE. a. Roof signs and billboards shall be secured and anchored in an approved manner to buildings or structures over which they are constructed or erected. The dead and wind loads of such signs and billboards shall be distributed to the structural members of the building or structure in such a manner that no structural member shall be over stressed. b. Uplift due to overturning of roof signs and billboards shall be resisted by approved anchorage to the building or structure. Approved anchorage to the building or structure shall include such alterations to the building or structure as may be needed to integrate and interconnect sufficient dead load to equal not less than 10% in excess of the computed uplift applied to such building or structure by the sign or billboard.

Ask a question about Milwaukee law

Corpus searches the Milwaukee sections it holds and shows the ones that match, with their citations. Free, no sign-in.