Administration.
Metropolitan Code of Nashville and Davidson County § 17.38.010.C
in effect17.38.010.C - Administration.
1. Design sites. Multiple building types may be accommodated on a single parcel with a showing that each building can accommodate a lot that meets the requirements of the zoning district. See Table 17.38.010.C-1. The planning department may require subdivision for large or complex sites where right of way or public utility infrastructure is necessary for the public welfare.
Application for a design site shall be made with the Planning Department before submitting a final site plan to the Codes Department. Such application shall include a plan showing building, lot, and open space layouts, any public dedications and reservations as required by the Major and Collector Street Plan, and the provisions of the base zoning requirements requested to be modified.
2. Dedications. When a right-of-way dedication is required for an existing lot or parcel along an existing street, the minimum lot area shall be considered to be the area prior to the dedication. Sidewalks shall be constructed to the standard of the Major and Collector Street Plan or, if on a local street, to local street standards.
3. Modifications. Based on site-specific issues, modifications to the standards of 17.38.010 or 17.38.020 may be necessary. Any standard may be modified other than lot size, unit count, total building coverage, and land uses, insofar as the intent of the standard is being met; the modification results in better urban design for the neighborhood as a whole; and the modification does not impede or burden existing or future development of adjacent properties. Planning commission or planning department staff may approve modifications as follows:
A. The planning department staff may approve minor modifications, those containing deviations of 25 percent or less of a numerical standard or locational or access requirements in order to accommodate other life, health and safety requirements or to retain existing structures.
B. Major modifications, deviations of more than 25 percent, will be considered by the planning commission.
C. Application for a modification to the standards shall be made with the Planning Department before submitting a final site plan to the Codes Department. Such application shall include a plan showing building, lot, and open space layouts, any public dedications and reservations as required by the Major and Collector Street Plan, and the provisions of the base zoning requirements requested to be modified.
4. Variances. The zoning administrator shall include the recommendation of the planning department with any request for variance.
5. Setbacks for Irregular Lots. Wherever a lot is of such irregular shape that the setback provisions cannot be readily applied, the zoning administrator shall interpret the application of the setback provisions.
6. Encroachment into Setbacks.
A. Other permitted setback encroachments per Sections 17.12.040 and 17.38.030.
B. The zoning administrator may allow necessary adjustments to the build-to zone when existing utilities or utility easements are within the build-to zone and unusual circumstances require that the utilities cannot be relocated or easements reduced. Upon allowing an adjustment to the build-to zone, the zoning administrator may also allow adjustments to the rear setback and landscape buffer yard as authorized by Table 17.24.230, to provide for a necessary building area. The zoning administrator may allow necessary adjustments to the build-to zone, rear setback and landscape buffer yard based on the nature of the existing and future land uses and site conditions in the general vicinity after receiving a written recommendation from the planning department and any relevant department or agency.
Table 17.38.010.C-1: Example of Multiple Buildings on an Existing Lot
Step 1: Determine Applicability
Multiple buildings are allowed on an existing lot only in the Residential Neighborhood (RN) and Residential Limited (RL) zoning districts. See Zoning Map to identify if applicable zoning districts apply to the development site. | [image omitted; see the official code]
Step 2: Apply Design Sites
When siting multiple buildings on an existing lot, each existing lot shall be divided into hypothetical lots, or design sites, that meet the standards of the applicable zone district. Each design site is required to front onto the adjacent street. Where there are two adjacent streets, the design site(s) may front on either in compliance with the standards. Select only one primary building type for each design site from the allowed building types for the zoning district. | [image omitted; see the official code]
Step 3: Apply Building Types
Apply a building type on each design site in compliance with the required setbacks and other standards of the Residential Neighborhood (RN) or Residential Limited (RL) zoning district, and applicable building type standards. Select and apply building frontage type(s) to each building/ unit entry. | [image omitted; see the official code]
[image omitted; see the official code]
(Ord. BL2025-1005 § 1(Exhs. A, F), 2025)
Source: Metropolitan Government of Nashville and Davidson County, Metropolitan Code and Charter (Municode Library, library.municode.com)URL: https://library.municode.com/tn/metro_government_of_nashville_and_davidson_county/codes/code_of_ordinances?nodeId=CD_TIT17ZO_CH17.38DESEMUMI_17.38.010.CADFetched: 10/28/2026
