Height designations.
Tulsa Revised Ordinances tit. 42, § 10.040
in effectSection 10.040. - Height designations.
A. Regulations. MX district height designations are indicated by a dash and number suffix at the end of an MX district map symbol. Except as stated by the transition standards of Subsection 10.040B., building heights in MX districts may not exceed the limits established in Table 10-8.
Table 10-8: MX District Height Designations
Height Designation | Maximum Height (feet)
-35 | 35
-45 | 45
-55 | 55
-65 | 65
-U | Unlimited (no maximum)
B. Height transition. For MX-zoned lots that abut an R-zoned lot, the maximum building height limit at the point of the required minimum setback is forty (40) feet. Height may be increased above forty (40) feet by up to one foot (vertical) for each six (6) inches of additional building setback, up to the maximum height allowed in the district. The additional setback may be provided for the entire building or only the portion of the building above forty (40) feet in height (see Figure 10-8).
Figure 10-8: Transitional Height Standards
[image omitted; see the official code]
Source: City of Tulsa, Revised Ordinances and City Charter (Municode Library, library.municode.com)URL: https://library.municode.com/ok/tulsa/codes/code_of_ordinances?nodeId=COOR_TIT42ZOCO_CH10MIEDI_S10.040HEDEFetched: 10/28/2026
