Architecturally integrated subdivisions.
Batesville Code of Ordinances, App. A, art. VI, § 608
in effectSec. 608. - Architecturally integrated subdivisions.
(a) In any architecturally integrated subdivision, the developer may create lots and construct buildings without regard any minimum lot size, lot width, or setback restrictions except that:
(1) Lot boundary setback requirements shall apply where and to the extent that the subdivided tract abuts land that is not part of the subdivision; and
(2) Each lot must be of sufficient size and dimensions that it can support the structure proposed to be located on it, consistent with all other applicable requirements of this appendix.
(b) The number of dwelling units in an architecturally integrated subdivision may not exceed the maximum density authorized.
(c) To the extent reasonably practicable, in residential subdivisions the amount of land "saved" by creating lots that are smaller than the standards set forth shall be set aside as usable open space.
(d) The purpose of this section is to provide flexibility, consistent with the public health and safety and without increasing overall density, to the developer who subdivides property and constructs buildings on the lots created in accordance with a unified and coherent plan of development.
(Ord. No. 2010-09-743, 9-7-10)
Source: City of Batesville, Mississippi, Code of Ordinances (Municode Library, library.municode.com)URL: https://library.municode.com/ms/batesville/codes/code_of_ordinances?nodeId=APXAZO_ARTVIDEDIRE_S608ARINSUFetched: 10/31/2026