Testing of assemblies.
Round Rock Code of Ordinances § 44-178
in effectSec. 44-178. - Testing of assemblies.
(a) The director shall inspect and test, or cause to be inspected and tested, all assemblies in each of the following circumstances:
(1) Immediately after installation;
(2) Whenever the assembly is relocated;
(3) A minimum of once every 12 months for assemblies that are used in high-hazard applications. Assemblies that are used in non-hazard applications must be tested a minimum of once every seven years;
(4) Premises that have been vacated and unoccupied for 12 months, prior to reoccupancy; or
(5) Immediately after repairs have been made to the assembly.
(b) All assembly testing shall be performed by a licensed backflow prevention assembly tester registered with the third party vendor.
(c) Duly authorized employees of the city are authorized to enter any public or private property at any reasonable time for the purpose of enforcing this article. Persons and occupants of premises which are provided water service by the city, either directly or indirectly, shall allow the city ready access at all reasonable times to all parts of the premises for the purposes of inspection, testing, records examination, or in the performance of any of their duties. Where persons or occupants of premises have security measures in force which would require proper identification and clearance before entry onto their premises, the persons and occupants of the premises shall make necessary arrangements with their security personnel so that upon presentation of suitable identification, personnel from the city will be permitted to enter, without delay, for the purposes of performing their responsibilities.
(d) The city shall not be liable to any person for any damage to an assembly that occurs during testing or repairing.
(e) The director may cause a water use survey to be conducted at any commercial establishment located in the city which is served by a public water supply or which provides water to the public. Upon determination by the director that the commercial establishment falls under the provisions of this article and requires an assembly, the director shall issue a notice to abate the condition or order the commercial establishment to install the proper assembly.
(f) It is the responsibility of the property owner to have all assemblies tested upon installation in accordance with this article.
(g) After the initial testing upon installation, it is the responsibility of the water customer to have all assemblies subsequently tested in accordance with this article. Assemblies may be required to be tested more frequently if the director deems it necessary.
(h) All results from assembly testing, repairs and replacements by a licensed backflow prevention assembly tester shall be submitted to the third party vendor.
(Code 1995, § 10.706; Ord. No. O-2015-2423, § I, 5-14-2015; Ord. No. O-2016-3846, § I, 10-27-2016)
Source: City of Round Rock, Texas, Code of Ordinances (Municode Library, library.municode.com)URL: https://library.municode.com/tx/round_rock/codes/code_of_ordinances?nodeId=PTIICOOR_CH44UT_ARTVIICRCOCOPR_S44-178TEASFetched: 11/16/2026
