Vehicular use area buffers.
Tulsa Revised Ordinances tit. 42, § 65.060
in effectSection 65.060. - Vehicular use area buffers.
A. Purpose. The vehicular use area buffer regulations of this section are intended to help mitigate the visual and operational impacts of parking lots and other vehicular use areas when such areas are adjacent to streets, highways, residential zoning districts, or agricultural-residential zoning districts.
B. Applicability. A "vehicular use area" is an area on a lot that is not contained within a garage or similar enclosed or partially enclosed structure that is designed and intended for use by motor vehicles, including parking lots, vehicle storage and display areas, loading areas; and driveways and drive-through lanes. Unless otherwise expressly stated, the vehicular use area buffer regulations of this section apply to all the following:
1. The construction or installation of any new vehicular use area with a contiguous paved area of three thousand five hundred (3,500) square feet or more; and
2. The expansion of any existing vehicular use area that results in the addition of three thousand five hundred (3,500) square feet of paved area, in which case the vehicular use area perimeter landscaping requirements of this section apply only to the expanded area.
C. Requirements.
Figure 65-3: Street Frontage Buffer
[image omitted; see the official code]
1. Street frontage buffers.
a. When a vehicular use area is located adjacent to a street or highway right-of-way, street frontage buffers must be provided in accordance with this subsection to physically and visually buffer the vehicular use area from the right-of-way.
b. Street frontage buffers are required only when the vehicular use area is located within one hundred (100) feet of the right-of-way and there are no intervening buildings between the vehicular use area and the right-of-way.
c. Except as expressly stated for vehicular use areas in the CBD zoning district (see Subsection 65.060C.1.d.), street frontage buffer areas must be at least seven (7) feet in width and include an S1 screen, in accordance with Subsection 65.070C.1.
d. In the CBD zoning district, required street frontage buffers must be at least three (3) feet in width and include an S1 screen, in accordance with Subsection 65.070C.1.
e. Groundcover plants must be provided in all street frontage buffer areas not covered by fences or walls.
f. The vehicle overhang allowance of Subsection 65.050D.4. applies to parking spaces abutting street frontage buffers.
2. R or AG-R District Buffers
Figure 65-4: R and AG-R District Buffer
[image omitted; see the official code]
a. When a vehicular use area is located on a lot abutting an R- or AG-R-zoned lot, an R or AG-R district buffer must be provided in the form of an F1 screen, in accordance with Subsection 65.070C.
b. R or AG-R district buffers are required only when the vehicular use area is located within 100 feet of an abutting R- or AG-R-zoned lot and there are no buildings between the vehicular use area and the abutting R- or AG-R-zoned lot.
c. Groundcover plants must be provided in all R or AG-R district buffer areas that are not covered by fences or walls.
d. The vehicle overhang allowance described in Subsection 65.050-D4 applies to parking spaces abutting R or AG-R district buffers.
3. Materials, installation and maintenance. See Section 65.080 and Section 65.090.
(Ord. No. 24382, §§ 5—8, 6-10-2020; Ord. No. 25656, § 24, 9-10-2025)
Source: City of Tulsa, Revised Ordinances and City Charter (Municode Library, library.municode.com)URL: https://library.municode.com/ok/tulsa/codes/code_of_ordinances?nodeId=COOR_TIT42ZOCO_CH65LASC_S65.060VEUSARBUFetched: 10/28/2026
