20.70.220

All development regulations in the DC-NT1 district shall conform to the development regulations set forth below in Table 20-150. Table 20-150 Location Height Limit* Setback* Special Conditions* Supplemental Standards* Balbach (south side, between Almaden Avenue and Almaden Boulevard) 10 feet 50-foot setback required for portions of buildings above 70 feet Almaden Avenue (west side between Balbach and Reed Streets) 35 feet or 2 - 1/2 stories Almaden Boulevard (east side between Almaden Blvd. and Almaden Avenue between Balbach Street and I-280) 70 feet (to a maximum depth of 100 feet) Planning Commission may allow heights up to 100 feet to a maximum depth of 100 feet from Almaden Blvd and at a minimum distance of 50 feet from Balbach, if design guidelines are met Portions of buildings higher than 70 feet shall be: 1. Limited to 100 feet in length and a diagonal no greater than 125 feet. Shorter side to be generally parallel to Almaden Blvd. 2. Set back one foot from common property lines for each two feet in excess of 70 feet Market Street (west side, Balbach to Pierce) 60 feet Front and side setbacks not permitted Setbacks allowed for recessed entries Market Street (west side, Pierce to Hwy. 280) 120 feet Minimum 10 feet to residential property line Height may not exceed a slope of 3:2, as measured from ground level at the adjacent residentially zoned property line * Where no standard is specified, the development standards of the DC District shall prevail (Ord. 27091.)