263.36

SEC. 263.36. STONESTOWN MIXED-USE HEIGHT AND BULK DISTRICT. (a) Boundaries of the Stonestown Mixed-Use Height and Bulk District. The boundaries of the Stonestown Mixed-Use Height and Bulk District are set forth in Sectional Map HT13 of the Zoning Map of the City and County of San Francisco and include all areas that are the subject of the Stonestown Special Use District set forth in Planning Code Section 249.9, as shown on Special Use District Map SU13. (b) Purpose. The purpose of the Stonestown Mixed-Use Height and Bulk District is to enable development of the Stonestown Special Use District as a high-density, mixed-use, sustainable community consistent with the Purposes set forth in Planning Code Section 249.9 and the Stonestown Design Standards and Guidelines (DSG) referenced therein. (c) Controls. (1) In the Stonestown Mixed-Use Height and Bulk District, height and bulk and definitions applicable thereto are governed by Planning Code Section 249.9 (the Stonestown Special Use District) and the DSG referenced therein. (2) Amendments to the height and bulk controls in this Stonestown Mixed-Use Height and Bulk District shall be as provided in Section 249.9. (Added by Ord. 204-24, File No. 240409, App. 8/1/2024, Eff. 9/1/2024, Oper. 9/1/2024) SEC. 270. BULK LIMITS: MEASUREMENT. (See Interpretations related to this Section.) (a) The limits upon the bulk of buildings and structures shall be as stated in this Section 270 (including Sections 270.1, 270.2, and 270.3) and in Sections 271 and 272. The terms Diagonal Dimension, Height, Length, and Plan Dimensions shall be as defined in this Code. In each height and bulk district, the maximum plan dimensions shall be as specified in the following table, at all horizontal cross-sections above the height indicated.

TABLE 270 BULK LIMITS District Symbol on Zoning Map Height Above Which Maximum Dimensions Apply (in feet) Maximum Plan Dimensions (in feet) Length Diagonal Dimension TABLE 270 BULK LIMITS District Symbol on Zoning Map Height Above Which Maximum Dimensions Apply (in feet) Maximum Plan Dimensions (in feet) Length