Sec. 25-115. - Prohibited discharges to public sewers.
No user shall contribute or cause to be contributed, directly or indirectly, any pollutant or wastewater which will interfere with the operation or performance of the wastewater collection and transmission system or wastewater treatment plant. These general prohibitions apply to all such users of wastewater collection or transmission system whether or not the user is subject to national categorical pretreatment standards or any other national, state, or local pretreatment standards or requirements. Users which are subject to the national categorical pretreatment standards shall contact the state department of natural resources, bureau of pollution control for further directions. A user may not contribute the following substances to wastewater collection or transmission system:
(1) Any liquid, solids or gases which, by reason of their nature or quantity, are, or may be, sufficient, either alone or by interaction with other substances, to cause fire or explosion or be injurious in any other way to the sewage works or to the operation of the sewage works. At no time shall two (2) successive readings on an explosion hazard meter, at the point of discharge into the system (or at any point in the system) be more than five (5) percent nor any single reading over ten (10) percent of the lower explosive limit (LEL) of the meter. Prohibited materials include, but are not limited to, gasoline, kerosene, naphtha, benzene, toluene, xylene, ethers, alcohols, ketones, aldehydes, peroxides, chlorates, perchlorates, bromates, carbides, hydrides, sulfides, and any other substances which the city, the state or the U.S. Environmental Protection Agency has notified the user is a fire hazard or a hazard to the system.
(2) Any waters or wastes containing toxic or poisonous solids, liquids, or gases in sufficient quantity, either singly or by interaction with other wastes, to injure or interfere with any sewage treatment process, constitute a hazard to humans or animals, create a public nuisance, or create any hazard in the receiving waters of the sewage treatment plant, including, but not limited to, cyanides in excess of 0.05 mg/l as CN in the wastes as discharged to the public sewer.
(3) Any waters or wastes having a pH lower than 6.0, or having any other corrosive property capable of causing damage or hazard to structures, equipment, and personnel of the sewage works.
(4) Solid or viscous substances which may cause obstruction to the flow in a sewer or other interference with the operation of the wastewater treatment facilities such as, but not limited to: fats, oils, grease, (FOG), garbage with particles greater than one-half inch in any dimension, animal guts or tissues, paunch manure, bones, hair, hides or fleshings, entrails, whole blood, feathers, ashes, cinders, sand, spent lime, stone or marble dust, metal, glass, straw, shavings, grass clippings, rags, spent grains, spent hops, waste paper, wood, plastics, gas, tar, asphalt residues, residues from refining, or processing of fuel or lubricating oil, mud, or glass grinding or polishing wastes.
(Ord. No. 3691, Art. V, § 3, 5-1-84; Ord. No. 4575, 6-20-23)